MAJORITY D40 Manuel - Sayfa 4

Stereo sistemi MAJORITY D40 için çevrimiçi göz atın veya pdf Manuel indirin. MAJORITY D40 7 sayfaları.
Ayrıca MAJORITY D40 için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır
MAJORITY D40 Manuel
1 . Power On/Off
17. Reset
1 . Volume Up
19. Play/Pause
20. Previous/Back
21. Volume Down
22. Treble Down
23. Bass Down
24. Mode
25. Bass Up
2 . Treble Up
27. Next/Forward
2 . Mute

Instructions Guide

 Please note all (Ref.) refer to the Controls and Functions in the above diagrams.
Setting up your Majority D40 Speakers
Connecting and Powering the Unit
Using the power cord provided, plug one end into the back of the primary speaker (Ref.12) and plug the other
end into a mains socket. Switch the unit on at the back of the primary speaker (Ref.11).
Connect the two speakers together via the speaker connector cable (Ref.8). To do this, plug the left speaker
connector cable plug into the right (primary) speaker connector, which reads ('To L speaker') (Ref.9).
Switch on your Majority D40 Speakers
Press the 'Power' button (Ref.16) on the remote control or press and hold the 'Mode' button on the unit
(Ref.3) to switch the speakers on (or off).
Remote Power
Remove the battery cover of the remote control. Insert 2 x AAA batteries (included). Replace the battery
cover.
 Note: when using the remote control, ensure that you are pointing at the remote sensor (Ref.1)
otherwise the unit may not respond to keypresses.
Basic Operation
Basic Controls
Volume, treble and bass can be changed on all speaker modes.
Use the 'Volume Up' (Ref.18)/(Ref.4) and 'Volume Down' (Ref.21)/(Ref.5) buttons to control the volume.
Press 'Mute' on the remote control (Ref.28) to mute the audio.
Use the 'Treble Down' (Ref.22), 'Treble Up' (Ref.26), 'Bass Down' (Ref.23) and 'Bass Up' (Ref.25) buttons to
control the bass and treble settings of the sound. Press 'Reset' (Ref.17) to reset the treble and bass settings.