IKEA FROSTIG BC219 Kullanıcı Kılavuzu - Sayfa 11
Buzdolabı IKEA FROSTIG BC219 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. IKEA FROSTIG BC219 16 sayfaları.
Ayrıca IKEA FROSTIG BC219 için: Kullanıcı Kılavuzu (48 sayfalar)
ENGLISH
inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potential source of danger for children.
For further information on the treatment, recovery
and recycling of this product, contact your competent
local office, the household waste collection service or
the shop where you purchased the appliance.
Information:
This appliance does not contain CFCs. The
refrigerant circuit contains R600a (HC) (see the rating
plate inside the appliance).
Appliances with Isobutane (R600a): isobutane is a
natural gas without environmental impact, but is
flammable. Therefore, make sure the refrigerant
circuit pipes are not damaged.
Electrical connection for Great Britain and Ireland only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS
1363A 13amp fused plug, to change a fuse in this
type of plug use an A.S.T.A. approved fuse to BS
1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2.Fit replacement 13A fuse into fuse cover.
3.Refit both into plug.
Important:
The fuse cover must be refitted when changing a
fuse and if the fuse cover is lost the plug must not
be used until a correct replacement is fitted.
Correct replacement are identified by the colour
insert or the colour embossed in words on the base
of the plug.
Replacement fuse covers are available from your
local electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and
socket is also used, the 2-pin, side earth type.
Declaration of conformity
• This appliance has been designed for preserving
food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
n
• This appliance has been designed, manufactured
and marketed in compliance with:
- safety objectives of the "Low Voltage" Directive
2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive "EMC"
2004/108/EC.
Electrical safety of the appliance can only be
guaranteed if it is correctly connected to an
approved earthing system.
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket
outlet, please contact After-sales Service for further
instruction. Please do not attempt to change plug
yourself. This procedure needs to be carried out by
a qualified technician in compliance with the
manufactures instructions and current standard
safety regulations.
1 1