ENGLISH
What to do if...
The red light
comes on, an
acoustic alarm sounds and the
letter "F" flashes on the display.
The red light
flashes and an
acoustic alarm sounds even with
the door closed.
The red light
comes on (without
flashing), an acoustic alarm sounds
and the freezer compartment
temperature display flashes.
Possible causes:
Malfunction alarm
The alarm indicates a fault
in a technical component.
Blackout alarm
Activated when the power
is cut off for an extended
period of time, causing
the freezer compartment
temperature to rise.
Note: A different product
temperature cannot be
set until the power failure
alarm is deactivated
Freezer compartment
temperature alarm
The temperature
alarm indicates that
the temperature of the
compartment is not at its
optimum level. This may
happen: when it is first
used, after defrosting
and/or cleaning, if large
amounts of food are placed
inside the freezer or when
the freezer door has not
been shut properly.
Solutions:
Call the authorised Service
Centre. Press the "Stop Alarm"
button to deactivate the acoustic
signal.
Before deactivating the acoustic
signal, it is advisable to pay
attention to the temperature
shown on the temperature
display, corresponding to the
highest temperature reached in
the freezer compartment during
the power failure. Press the
"Stop Alarm" button briefly to
deactivate the acoustic signal.
After pressing the button, the
temperature display shows the
set temperatures again. If the
freezer compartment has not
yet reached the optimum food
preservation temperature, the
freezer compartment temperature
alarm could be activated (see
freezer compartment temperature
alarm). Check the food before
consuming it.
Press the Stop Alarm button to
deactivate the acoustic signal.
When the optimal temperature
conditions have been reached,
the red light switches off
automatically. If the temperature
alarm persists, contact the After
Sales Service.
14
Sayfayı Yazdır