Century CC1206 Kullanıcı El Kitabı - Sayfa 5
Akü Şarj Cihazı Century CC1206 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Century CC1206 13 sayfaları. 12 volt automatic battery charger
Sayfayı Yazdır
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
DC Output Lead:
Charging Leads:
TECHNICAL SPECIFICATIONS:
Model Number
Output
Input Voltage
Input Frequency
Charge Voltage
Equalising Voltage
Float Voltage
Start Voltage
Operating Temperature
Storage Temperature
Operating Humidity
Size (L*W*H)
Weight
Approvals
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (On Sealed Maintenance Free batteries, check the State of
Charge indicator). If necessary, remove the vent caps and add distilled water so the levels are
halfway between the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible and to
determine which Battery Type and Charge Rate settings you will use.
Visit http://www.centurybatteries.com.au/battery-charging or
http://www.centurybatteries.co.nz/battery-charging for advice on which Battery Type and
Charge Rate settings to select.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
4 • Owner's manual - Model. CC1206
1.8m with SAA 2 Pin AU Plug
1.2m with quick connect
Quick connect 60cm Crocodile Clip harness and 60cm
Ring Terminal harness
CC1206
6A @ 12V DC
100-240Vac / 1.4A - 0.75A (95W)
50/60Hz
Gel - 14.1V
AGM/Flooded - 14.4V
SMF [Calcium] - 14.7V
Gel - 14.3V
AGM/Flooded - 14.6V
SMF [Calcium] - 16.2V
13.6V
3V
-15 to 50° C
-25 to 85°C
90% RH Max.
189mm x 98mm x 51mm
800g (approx.)
CE, UL/cUL, AS/NZS, EMC