Gandy 24H13 Parça ve Montaj Kılavuzu - Sayfa 11
Serpme Gandy 24H13 için çevrimiçi göz atın veya pdf Parça ve Montaj Kılavuzu indirin. Gandy 24H13 19 sayfaları. 24-inch variable rate spreader
Ayrıca Gandy 24H13 için: Operatör El Kitabı (8 sayfalar), Operatör El Kitabı (8 sayfalar), Operatör El Kitabı (10 sayfalar)
Sayfayı Yazdır
Step #9
(Left Brace to Mount Tube Assembly)
1.
Locate the TWO braces (28242-1), TWO 1/4 x 1/2 hex bolts (C03-0250-010), ONE 1/4 x 1-1/2 hex bolt (C03-
0250-061), THREE 1/4" flange nuts (C01-0250-030) and ONE 1/4" washer (C02-0250-020).
2.
Attach one end of the brace to the 1/4" hole in the left side of the hopper as shown in Diagram #21 using a
1/4 x 1/2 hex bolt and 1/4" flange nut as shown. Do not tighten bolt.
3.
Attach the other end of the brace to the 1/4" hole in the side of mount tube using a 1/4" washer, 1/4 x 1-
1/2 hex bolt and 1/4" flange nut. Do not tighten, leave loose.
Diagram #21
Page 11 of 19
2824-A3