AGV INSYDE Hızlı Başlangıç Kılavuzu

Kulaklıklar AGV INSYDE için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AGV INSYDE 4 sayfaları.

Sayfayı Yazdır
OVERVIEW
keyboard
keyboard
intercom
media
Default language is English. Language set can be changed
Quick start guide
via the Cardo Connect app.
GETTING STARTED
On/Off
1"
Volume +
x1
Mute
x1
Use while charging
ASSEMBLY |
Make sure to perform a correct and safe assembly. Incorrect assembly can lead to dangerous situations while riding. In case of any doubts, ask your dealer to support.
1
1 Remove the two covers applied on the helmet:
Remove the two covers applied on the helmet:
using the specific tool
using the specific tool
provided, release
provided, release
1
the two clips of the back unit
the two clips of the back unit
2
release the clip of the headset
release the clip of the headset
downwards. Remove the right-side cheek pad
downwards. Remove the right-side cheek pad
main unit
main unit
(see the helmet user manual).
(see the helmet user manual).
4
3
USB charging
USB charging
and firmware upgrade
and firmware upgrade
1
2 2 Install the back unit and thread its right side ca-
Install the back unit and thread its right side ca-
bles
bles
under the helmet base trim (use the tool if
under the helmet base trim (use the tool if
1
necessary). Move the retention system
necessary). Move the retention system
fore threading the cables. Attach the cover with the
fore threading the cables. Attach the cover with the
hole for the charging slot
hole for the charging slot
supplied with Insyde.
supplied with Insyde.
3
LED
mobile
3
volume up
volume down
PAIR MOBILE DEVICES
Pair phone
Volume -
2
Search for Bluetooth
Bluetooth
®
x1
AGV INSYDE
Cancel pairing
5"
1"
Flash
END
3 3 Apply the headset through the three hooking
Apply the headset through the three hooking
guides
guides
and hook the plastic clip placed on
and hook the plastic clip placed on
1
and detach it;
and detach it;
the lower side
the lower side
. Then be sure to thread its
. Then be sure to thread its
2
and push it
and push it
cable underneath the helmet base trim
cable underneath the helmet base trim
3
1
1
1
2
2
4
2
4 4 Connect the microphone and the speakers ca-
Connect the microphone and the speakers ca-
bles. Then, on the right side of the helmet, in-
bles. Then, on the right side of the helmet, in-
out be-
out be-
stall the microphone in two movements.
stall the microphone in two movements.
2
1
2
1
Initiate pairing
5"
Flash
3
Add a second phone/GPS
®
devices
x2
flash
Pair phone
4
4
Pair GPS
Search for
Bluetooth
devices
®
Bluetooth
®
AGV INSYDE
x1
Search for
4A
Bluetooth
®
GPS
Paired successfully
Flash
5 Drive the microphone cable through its own
5
Drive the microphone cable through its own
slot on the speaker's housing.
slot on the speaker's housing.
. .
3
3
6 6 Install both the speakers
Install both the speakers
in their housing
in their housing
1
using the adhesive strap supplied. To install the
using the adhesive strap supplied. To install the
left speaker, lift the cheek pad first, then attach
left speaker, lift the cheek pad first, then attach
it making sure that all its press studs
it making sure that all its press studs
are
are
2
fixed (see the helmet user manual for the cheek
fixed (see the helmet user manual for the cheek
pad operations).
pad operations).
2
1
2
PHONE
Voice dial
x1
Redial
x2
Speed dial
Set via app
x3
Share a call with DMC group
Bridging active phone calls to the DMC group
Start / Stop sharing call
devices
x1
7 7 Insert the cables connectors
Insert the cables connectors
in the empty
in the empty
1
space between the outer shell and the polystyrene,
space between the outer shell and the polystyrene,
on the right side. Insert the microphone cable first,
on the right side. Insert the microphone cable first,
then the speakers one.
then the speakers one.
1
8 8 Detach the crown pad releasing its two snap
Detach the crown pad releasing its two snap
buttons
buttons
, then thread the left speaker cable
, then thread the left speaker cable
1
2
between the polystyrene and the crown pad. Then
between the polystyrene and the crown pad. Then
fix the crown pad, taking care not to damage the
fix the crown pad, taking care not to damage the
cables.
cables.
1
1
2
Answer a call
x1
Any of these three buttons
Ignore a call
x1
Reject a call
2"
End a call
x1