GANN Klima 30 Kullanım Talimatları Kılavuzu - Sayfa 14

Veri Kaydediciler GANN Klima 30 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. GANN Klima 30 19 sayfaları.

2.6

LED-Anzeige

The LED indicator blinks green during the measurement interval (during the data logger

is recording) (Klima 30)

The LED indicator blinks red when a given limit is exceeded (Klima 20 & Klima 30)

2.7

External temperature sensor (only Klima 30)

It is possible to connect an external temperature sensor to the USB-port of the

data logger Klima 30.



Remove the white rubber cap (on the left side of the data logger)



Connect the external temperature sensor to the USB-port of the data

logger



The data logger automatically adapt tot he temperature sensor; you

don't have to set the data logger



When you disconnect the temperature sensor from the data logger,

please employ the white rubber cap into the USB-port to prevent any

damage

2.8



To change the battery, open the battery compartment on the back of

the data logger



Turn the battery cover 90° tot he left to open it



The battery can now be removed

Proper battery change:

1. Insert a pointed object (eg a screwdriver) into the space between the battery

and the bracket (A)

2. Now lift the battery carefully using the pointed object

3. Now you can remove the battery

4. To insert a new battery, press the battery against point B and then place it

into A

Data logger Klima 20 / 30

Basic functions