Green Gorilla ProLine Kullanıcı Kılavuzu - Sayfa 14

Boya Püskürtücü Green Gorilla ProLine için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Green Gorilla ProLine 20 sayfaları. Industrial system

Sayfayı Yazdır

PowerPack Usage

Turn PowerPack on by depressing the on/o power button on the top surface of the

PowerPack as shown above ( gure 32).

If fully charged, a green light will display on both the top surface and the center of the

knob. Both the knob indicator light and the power level indicator are synchronized to

indicate power depletion during normal operation. Green = Full Charged, Yellow = Half

Charge, Red = Low Battery ( gures 33 & 34).

During normal operation, the PowerPack will automatically cycle to maintain the

factory pressure set point as necessary. The Power Level Indicator Lights will remain on

to indicate the PowerPack is in pressure sensing mode.

Power Level

Indicator

IMPORTANT! After lling and pressurizing the system purge air from the wand and

wand hose by spraying product into a container until no air or air bursts are detected.

Inadequate purging of the system may initially result in uneven spray pattern or a

longer than expected ow after the wand trigger has been released.

Pg. 13

g. 33

On / O

g. 32

Power Level

Indicator

g. 34