decon Gearwheel GW1052 Kullanıcı Kılavuzu - Sayfa 9

Tekerlekli Sandalye decon Gearwheel GW1052 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. decon Gearwheel GW1052 12 sayfaları.

Important

It is possible to shift gears both while stationary and when in motion.

However, the gearbox works more smoothly when the wheelchair is

in motion.

Remove and secure the wheels

Unlock the wheels by lifting the QR–hoop (Figure 8.5) and pull the

wheel straight out (Figure 8.6). To re-fix the wheel lift the QR-hoop,

insert the wheel axle in its receiver on the chair whilst at the same

time engaging the peg on the wheel's rotation arm with the receiver

in the adaptor on the wheelchair (Figure 8.7). The wheel's QR-hoop

then drops down to its parked position and the wheel is locked

in place (Figure 8.8).

Fig 8.5

Fig 8.7

• It is preferable to remove the wheel when the gear lever is in the

direct drive (1:1) position.

• Check that the wheel is attached to the chair by pulling it outwards

and even shifting gears once to see that it does not slide out.

• Make sure the rotation lock is properly fitted. The peg on the

rotation arm is engaged in the receiver in the adaptor on the

wheelchair.

The wheelchair settings and adjustments are made according to the

wheelchair manufacturer's instructions. GEARWHEEL wheelchair wheels

provide the user with the unique ability to change gear. Although the

GEARWHEEL gearbox design is designed to require no adjustment, the

user is advised to check the wheelchair and the adaptors if the system is not

operating normally.

Fig 8.6

Fig 8.8