IKEA 504.678.35 Manuel - Sayfa 9

Hob IKEA 504.678.35 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA 504.678.35 46 sayfaları.

Sayfayı Yazdır

ENGLISH

Daily use

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1 second.

To turn the hob off, press the same button again, and all

cooking zones will be deactivated.

POSITIONING

Do not cover the control panel symbols with the cooking pot.

Please note: In the cooking zones close to the control panel,

it is advisable to keep pots and pans inside the markings

(taking both the bottom of the pan and the upper edge into

consideration, as this tends to be larger).

This prevents excessive overheating of the keypad. When grilling

or frying, please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND

ADJUSTING POWER LEVELS

To activate the cooking zones:

Press the + or - button of the required cooking zone to activate

it and adjust the power. The level will be shown in line with the

area, along with the indicator light identifying the active cooking

zone. The "BOOST" button can be used to select the quick

heating function.

To deactivate the cooking zones:

Press the "0" button to the left of the power adjustment

CONTROL PANEL LOCK

To lock the settings and prevent it being switched on

accidentally, press and hold the OK/Key lock button for 3

seconds. A beep and a warning light above the symbol indicate

that this function has been activated. The control panel is

locked, with the exception of the On/Off

controls, repeat the activation procedure.

There is one timer witch controls each cooking zones button.

To activate the timer:

Select the cooking zone, press the "+" or "-" button to set the

desired time. An indicator light will be activated in line with the

specific symbol

sound, and the cooking zone will switch off automatically.

The time can be changed at any point, and several timers can be

activated simultaneously.

In case the timer is activated "Zone selection indicator" flashes

and the relative cooking time selected is displayed on the

central display.

To deactivate the timer:

Press the "+" and "-" buttons together until the timer is

deactivated.

Timer not available with autofunctions.

The LED of "timer active indicator" indicates that the timer has

been set for the cooking zone.

This function allows to temporarily

hold and then resume cooking processes

maintaining previous settings. The function also freezes all

active timers.

To activate this function press II key.

The symbol II flashes on the display in place of the power levels.

To resume cooking, press

active zone again.

button. To unlock the

TIMER

. Once the set time has elapsed, a beep will

TIMER INDICATOR

PAUSE FUNCTION

key and touch the slider of an