IKEA HIN2K Kullanıcı Kılavuzu - Sayfa 6

Hob IKEA HIN2K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. IKEA HIN2K 48 sayfaları.

Sayfayı Yazdır

ENGLISH

Daily use

Place a suitable cookware on the cooking

zone before switching on the appliance

or immediately after operating it.

Adjusting the heat setting

Before being used again, the control knob

must be set to the off position.

Automatic switch off.

If one of the cooking zones is switched on with-

out an appropriate pan on the correspondent

area the cooking surface automatically

switches itself off after a couple of minutes. If

one of the cooking zones is not switched off

after a certain time, or if the heat setting is not

modified, the relevant cooking zone switches

off automatically. Before being used again, the

control knob must be set to the off position.

Helpful hints and tips

Cookware is suitable for induction cook-

ing zones if marked by the manufacturer.

Certain cookware can make noises when

being used on induction cooking zones.

The noises are not fault of the appliance and

do not affect operation in any way

Cookware sizes

Induction cooking zones adapt automatically

to the size of bottom of the cookware up to a

certain point. However the magnetic part of

the bottom of the cookware must have a min-

imum diameter depending on the size of the

cooking zone.

Turn clockwise to increase

Turn anti-clockwise to reduce

Turn to position

Function

to switch off

Heat set-

ting

1-2

3-4

6-9

Diameter of cooking

zone [mm]

Rear cooking zone

Front cooking zone

Energy saving

• If possible, always place lids on the pans.

• Place cookware on the cooking zone before

you switch it on.

• The bottom of the cookware should be as

thick and flat as possible.

Automatic Switch off after.

6 hours

5 hours

4 hours

1.5 hours

Minimum diameter

of cookware base

[mm]

145

120

Knob

set-

ting

1 - 9

9 - 1