IKEA KULINARISK Manuel - Sayfa 11

Hob IKEA KULINARISK için çevrimiçi göz atın veya pdf Manuel indirin. IKEA KULINARISK 20 sayfaları. Oven with steam feature
Ayrıca IKEA KULINARISK için: Kullanım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Manuel (36 sayfalar), Kullanım Kılavuzu (48 sayfalar), Talimatlar Kılavuzu (36 sayfalar), Manuel (24 sayfalar), Kurulum Talimatları Kılavuzu (36 sayfalar), Manuel (20 sayfalar), Manuel (44 sayfalar), Kullanıcı Kılavuzu (36 sayfalar), Manuel (40 sayfalar), Manuel (40 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Manuel (37 sayfalar), Manuel (32 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Manuel (20 sayfalar), Manuel (36 sayfalar), Manuel (21 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Manuel (40 sayfalar), Manuel (20 sayfalar), Manuel (32 sayfalar), Manuel (36 sayfalar), Manuel (17 sayfalar)

Sayfayı Yazdır

ENGLISH

What to do if...

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find a

solution to the problem yourself, contact an

authorized service center.

PROBLEM

Appliance not stable.

Appliance is not in horizontal

position.

Performance in terms of oil capture

are not satisfying.

Appliance does not work.

The light does not work.

Noise of hood is higher than

customer expectation.

Button A light flashing once per

second.

Button A lights flashing twice per

second.

Before contacting the Authorized Service Centre:

Switch the appliance on again to see if the problem has disappeared. If not, switch it off

again and repeat the operation after an hour.

If your appliance still does not work properly after carrying out the checks listed in the trou-

bleshooting guide and switching the appliance on again, contact the Authorized Service

Centre, clearly explaining the problem and specifying:

• the type of fault;

• the model;

• the type and serial number of the appliance (given on the rating plate).

POSSIBLE CAUSE

The appliance is not correctly installed.

Oil and grease on metal filters or

charcoal filters.

The appliance is not correctly con-

nected.

The LED is broken.

Air outlet diameter in the wall is too

small, causing a pressure drop and an

increase in motor speed.

Product is installed in recirculation

mode.

More than one bend in the ventilation

duct.

Grease filter alarm.

Charcoal filter alarm.

If you operated the appliance wrongly,

or the installation was not carried out

according to the Assembly instructions, the

visit from the Authorized Service Centre

technician may not take place free of

charge, even during the warranty period.

SOLUTION

Follow the Installation instruction enclosed to the ap-

pliance.

Follow the Installation instruction enclosed to the ap-

pliance.

Follow the cleaning frequency of filters as described in

the user manual.

Verify that the main cable is connected to the motor

group or the plug is connected to the socket.

For replacement, contact the Authorized Service Centre.

Follow the Installation instruction enclosed to the ap-

pliance.

Product in recirculation mode(and using a charcoal filter)

will generate an higher noise than a product in extration

mode.

If the exhaust system in the building has multiple bend

in or a long distance, this can increase the noise of the

product.

Please clean grease filter and reset alarm. Refer to care

and cleaning guide for maintenance and control panel

guide to reset the filter alarm.

Please clean charcoal filter and reset alarm. Refer to

care and cleaning guide for maintenance and control

panel guide to reset the filter alarm.