Britax R032S Series Manuel - Sayfa 5

Bebek & Yürümeye Başlayan Çocuk Mobilyaları Britax R032S Series için çevrimiçi göz atın veya pdf Manuel indirin. Britax R032S Series 6 sayfaları. Portable cot

Sayfayı Yazdır

4. TO USE THE BASSINET (con't)

Snap the 12 plastic clips onto the top rails of the cot.

Make sure the plastic clips are positioned against the

edge of the corner mouldings.

Attach the "hook & loop" strips in each corner of

the cot.

NOTE: ALWAYS SECURE THE MATTRESS BEFORE

USING THE BASSINET.

WARNING: TO PREVENT FALLS, THIS BASSINET

SHOULD NOT BE USED ONCE A CHILD CAN SIT UP.

ALWAYS REMOVE THE BASSINET BEFORE FOLDING

THE PORTABLE COT.

5. TO USE THE CHANGETABLE

WARNINGS

NEVER LEAVE CHILD UNATTENDED.

EVER PLACE A CHILD IN THE PORTABLE COT

WHEN THE CHANGETABLE IS IN USE.

LWAYS USE THE HARNESS WHEN USING THE

CHANGETABLE.

LWAYS FOLD THE CHANGETABLE AWAY WHEN

NOT IN USE.

Lay the changetable face down with the two plastic

hooks facing up.

Connect the tubes together on either side of the

changetable. Insert one tube end into the other

until the pin engages. Pull to make sure they are

locked together.

www.britax.com.au

1. TO OPEN THE COT (con't)

Place the mattress into the cot with its padded side

facing up.

Secure the mattress to the cot by passing the loop

straps through the slots in the cot base and pressing

it into the hook attachment strips, sewn to the

underside of the cot base.

NOTE: ALWAYS SECURE THE MATTRESS BEFORE

USING THE COT

2. TO USE THE WHEELS

Push the brake lever down to lock, or lift the brake

lever up to unlock.

NOTE: ALWAYS APPLY THE BRAKES WHEREVER AND

WHENEVER YOU ARE USING THE COT.

(Push down to lock) (Lift up to unlock)

3. TO FOLD THE COT

THESE STEPS MUST BE FOLLOWED IN THIS ORDER

TO EASILY FOLD THE COT.

IF BASSINET OR CHANGE TABLE ARE FITTED, THEY

MUST BE REMOVED BEFORE FOLDING THE COT.

Release the loop straps under the base that secure

the mattress and remove the mattress from the cot.