IKEA MATMASSIG 503.688.40 Manuel - Sayfa 10
Hob IKEA MATMASSIG 503.688.40 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA MATMASSIG 503.688.40 24 sayfaları.
Sayfayı Yazdır
ENGLISH
• Secure the connecting cable with cable
clips or clamps.
Connection diagram hob
One-phase connection 220 V - 240 V ~
1
2
3
N
Insert the bridge between the
screws as shown.
Main power connection 1-phase
L
Wiring colours:
Yellow / green
N
Blue
L
Black or brown
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Set the power setting for each zone to
the maximum level for a short time.
If :
• the hob cannot be activated
• only 2 cooking zones light up
L
N
PE
N
Two-phase connection 400 V 2L-1N ~
1
2
3
N
Main power connection 2-phase
L1 L2 L3 N
Wiring colours:
Yellow / green
N
Blue
L1
Black
L2
Brown
• the cooking zones on the left light up
faster and brighter than these on the
right,
disconnect the hob from the electrical
supply. Check if the hob is correctly
connected to the electrical supply. If the
problems continue, contact your IKEA store
call centre.
If
symbol comes on the
display, see the
"Troubleshooting" chapter.
10
L1
L2
N
PE