CEO Tech 50710 Kullanım ve Bakım Kılavuzu - Sayfa 8

TV Montajı CEO Tech 50710 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. CEO Tech 50710 9 sayfaları. Fixed led / lcd tv wall mount

Sayfayı Yazdır

Installation (continued)

Installing the mounting rod

□ Position the mounting rod (A) over the

installation holes. Ensure that the rod (A) is

level.

□ Attach the mounting rod (A) to the wall using lag

bolts (CC) and washers (BB). Tighten with the

hex wrench (DD).

CAUTION:

the wall plate is firmly attached. Do not

overtighten. Over-tightening can damage the

screws, greatly reducing the holding power.

Attaching the TV to the wall

□ Carefully hook the mounting brackets (B) over

the mounting rod (A).

□ Gently rest the spacers (GG) against the wall.

□ Connect the TV to any cables.

□ Secure the TV to the mounting rod (A) by pushing

the auto locker (1).

□ To remove the TV from the wall, pull on the rope

attached to the mounting bracket to release the

safety spring lock. Then carefully remove the TV.

Tighten the lag bolts so that

Attaching the mounting brackets

to the TV

□ Place two knobs (GG) or a combination with

spacers (HH) over the two bottom holes on the

back of the TV and attach using the properly sized

screws (EE) and washers (FF).

□ Attach the mounting brackets (B) to the top two

holes on the back of the TV using the screws (EE)

and washers (FF) you identified in step 1.

CAUTION:

are firmly attached. DO NOT OVERTIGHTEN. This

may damage your TV.

AS REQUIRED

Tighten the screws so the brackets