Airflow DUPLEXBASE PT 900 Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 8

Hava Kontrol Cihazları Airflow DUPLEXBASE PT 900 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Airflow DUPLEXBASE PT 900 16 sayfaları. Air handling units

Sayfayı Yazdır

Position of air intake and exhaust, M1 is configured as a supply fan (M-SUP).

After each change of unit orientation make sure that the filters of supply air (resp. extract air) are

positioned in the supply (resp. extract) section of the unit. For more information see Chapter 4.7.

4.4.

Installation

Before installation remove the wooden transport planks.

Fit the appliance in such a way that the prescribed handling spaces are observed:

View from the operator's side

The appliance is placed on height-adjustable stand feet included in delivery (4 pieces in sizes 500

and 900, 6 pcs in size 1800, 2800 and 3500).

Level the appliance horizontally on both longer and shorter side. Use adjustable stand feet.

Adjustable bases must be fully screwed into the stand feet when manipulating with

the unit. Only after putting the unit into the final installation position may the feet

height be adjusted. Failing to do so may cause irreversible damage of the feet.

Duplexbase PT

T (mm)

Plan view

500

900

1800

600

1100

2800

3500

1100