Green Lighting TRI-SENSOR GL4612LU Montaj ve Montaj Talimatları - Sayfa 6

Fener Green Lighting TRI-SENSOR GL4612LU için çevrimiçi göz atın veya pdf Montaj ve Montaj Talimatları indirin. Green Lighting TRI-SENSOR GL4612LU 6 sayfaları.

Sayfayı Yazdır

TROUBLESHOOTING

FAULT
Unit will not work at all
Sensing range too short
Lamp on all the time
Lamp false triggers
Blue LED indicator
doesn't work
Please note that this equipment and its components have NO user serviceable parts.
Green Lighting tries to improve its products for the benefit of its customers.
For this reason we reserve the right to make changes to any product at any time, without notice.
Green Lighting Instructions GL4612LU P-Lux3 LED Tri-Sensor Lantern
POSSIBLE CAUSE
• No power
• Area too light
• Re-position lantern
e.g. lighting nearby
• Faulty photocell
low, or angle of approach
into detection bands are
incorrect
• Other lighting interfering
with the sensitivity of the
PIR sensor
• Wrongly wired
• PIR is continuously being
activated
• Faulty electronic unit
• Lantern badly positioned
• High winds
• No power
GREENLIGHTING HELPLINE TEL: 01905 610200
Monday to Friday
www.greenlighting.co.uk
© Green Lighting
f at the mains.
SOLUTION
• Check power and fuse
• Cover the sensor with a black
cloth or black insulation tape
and switch on
• Re-position lantern
if required
• Call the Helpline
• Cover the photo cell with
a dark cloth then test
• Move the unit to a different
height and/or change the
angle of approach
(see INTRODUCTION)
• Move lantern away from
other lighting
• Switch off for 30 seconds
then restart
• Reposition lantern
• Call the help line
• Reposition lantern.
• Temporary situation
If annoying, switch lantern off
• Check power and fuse
• Call the helpline