Green Lighting GL-ML28P/BLK Kullanım Kılavuzu - Sayfa 3

Taşkın Işık Green Lighting GL-ML28P/BLK için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Green Lighting GL-ML28P/BLK 8 sayfaları. 28w 2300lm led security floodlight with pir

Sayfayı Yazdır

6. Installing the Floodlight

WARNING! Be sure to turn off the power supply to the fuse box before connecting the wires.

There is no safe way to make this connection with a live circuit.

1. Drill a hole in the wall to pass the wires from the power source

2. Hold the mounting base in the desired position on the wall, then mark the locations of the

screw holes. Drill a pilot hole into each screw hole location.

3. Pierce the grommet in the mounting base and thread the cable from the power source

through the grommet.

4. Screw the mounting box onto the wall using the wall plugs and mounting screws provided.

Note: Make sure that the drain is aligned towards the bottom.

5. Strip approximately 6mm (¼ in) of insulation from each of the wires.

Connect the wires to the terminals inside the junction box as follows (Fig 4), ensuring that

no copper remains exposed.

• Connect the BROWN (Live) wire to the terminal with the BROWN wire

• Connect the BLUE (Neutral) wire to the terminal with the BLUE wire

• Connect the YELLOW-GREEN (Earth) wire to the terminal with the YELLOW-GREEN wire

www.greenlighting.co.uk

Live E Neutral

• 3 •

Fig 3.

Drain

Fig 4.