HIKVISION H1T Series Kullanıcı Kılavuzu - Sayfa 10

Güvenlik Kamerası HIKVISION H1T Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION H1T Series 17 sayfaları. Turbo hd dome camera
Ayrıca HIKVISION H1T Series için: Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (14 sayfalar)

5. Secure the junction box's body with supplied screws

on the ceiling/wall.

6. Combine the junction box's cover with the junction

box's body.

Junction Box Body

7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to install the camera to the

junction box.

2.3.2 Wall Mounting

Before you start:

You need to purchase a wall mounting bracket

separately.

Steps:

1. Drill four screw holes in the wall according to the

holes of the bracket.

2. Install the bracket to the wall by aligning the four

screw holes of the bracket with expansion screws on

the wall.

3. Secure the bracket with four hex nuts and washers.

4. Install the mounting base of the turret camera to

the wall mounting bracket, and secure them with

supplied screws.

Figure 2-18 Install the Mounting Base to the Bracket

5. Route the cables through the bracket.

6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to complete the installation.

2.4 Ceiling Mounting of Type III Camera

Steps:

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Figure 2-16 Fix the Gang Box

Figure 2-17 Install the Bracket

Junction Box Body

Junction Box Cover