Ganz LPC1260 Kullanım Kılavuzu - Sayfa 5

Güvenlik Kamerası Ganz LPC1260 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ganz LPC1260 7 sayfaları. License plate capture camera

5. Installation

5-2. How to install to W al l

(A)

Mounting Screw

(Ø4x30L_3EA)

(B)

① Drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the

holes.

② Fix the plastic anchors in the holes.

③ Position the mounting bracket on the screw points.

④ Fix the mounting bracket by tightening the screws.

⑤ Slightly loosen knob (A) then adjust tilt(180˚) and rotation(360˚) of the camera and

tighten the knob firmly.

⑥ Slightly loosen knob (B) then adjust pan(360˚) of the camera and tighten the knob

firmly.

(Red)

Power cable

(Black)

Video output cable

Plastic anchor

5. Installation

① Pan 360˚

Slightly loosen Pan knob then adjust pan of the camera and tighten the knob firmly .

② Tilt 180˚

Slightly loosen Tilt knob then adjust tilt of the camera and tighten the knob firmly.

③ Rotation 360˚

Slightly loosen Tilt knob then adjust rotation of the camera and tighten the knob firmly.

Hole Plug

① NOTE: No User Zoom/Focus controls exist on this camera!

The LP camera uses parts common to another camera. Although the rear plate is

labeled with "Zoom" & "Focus" controls, none exist with this fixed lens camera.

These are merely hole plugs.

Pan knob

Tilt knob

ROTATE(360˚)

TILT(180˚)

Hole Plug