IKEA DATID Manuel - Sayfa 8

Havalandırma Davlumbazı IKEA DATID için çevrimiçi göz atın veya pdf Manuel indirin. IKEA DATID 24 sayfaları. 30" (76.2 cm) wall-mount canopy range hood
Ayrıca IKEA DATID için: Kullanıcı Kılavuzu (16 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kurulum Talimatları ve Kullanım & Bakım Kılavuzu (18 sayfalar)

Sayfayı Yazdır

ENGLISH

Maintenance and cleaning

To ensure your appliance is always working

correctly, check all functions on the product

periodically (eg. every 12 months), that it

is operating correctly, and if there appears

to be any abnormalities please contact the

service call centre for advice. For further

details please refer to the warranty terms

and conditions provided inside the back of

the user manual.

Regular care and maintenance ensures

correct operation and high performance.

To maintain your hob in perfect conditions,

clean it after every use.

Disconnect power before servicing.

All the enamelled and glass parts

should be cleaned with warm water and

neutral solution.

Stainless steel surfaces may be stained

by calcareous water or aggressive

detergents if left in contact for too long.

Any food spills (water, sauce, coffee, etc.)

should be wiped away before they dry.

Clean with warm water and neutral

detergent, and then dry with a soft

cloth or chamois. Remove baked-on dirt

with specific cleaners for stainless steel

surfaces.

NOTE: clean stainless steel only with soft

cloth or sponge.

Do not use abrasive or corrosive

products, chlorine-based cleaners or

pan scourers.

Do not use steam cleaning appliances.

Do not use flammable products.

Do not leave acid or alkaline substances,

such as vinegar, mustard, salt, sugar or

lemon juice on the hob.

CLEANING THE HOB PARTS

Grids, burner caps and burners can be

removed to be cleaned.

Clean them by hand with warm water

and non-abrasive detergent, removing

any food residues and checking that

none of the burner openings is clogged.

Rinse and dry

Refit burners and burner caps correctly

in the respective housings.

When replacing the grids, make sure

that the panstand area is aligned with

the burner.

Models equipped with electrical ignition

plugs and safety device require thorough

cleaning of the plug end in order to ensure

correct operation.

Check these items frequently, and if

necessary, clean them with a damp cloth.

Any baked-on food should be removed with

a toothpick or needle.

NOTE: to avoid damaging the electric

ignition device, do not use it when the

burners are not in their housing.