HIKVISION HWT-T110 Kullanıcı Kılavuzu - Sayfa 8
Güvenlik Kamerası HIKVISION HWT-T110 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION HWT-T110 16 sayfaları. Hd turret and bullet camera
Sayfayı Yazdır
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
5. Attach the mounting base to the ceiling, and secure
them with supplied screws.
Type I Camera
Figure 2-3 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains
self-tapping screws, and expansion bolts.
For cement ceiling, expansion bolts are required
to fix the camera. For wooden ceiling,
self-tapping screws are required.
6. Route the cables through the cable hole, or the side
opening.
7. Align the camera with the mounting base, and
tighten the screws to secure the camera on the
mounting base.
Figure 2-4 Secure the Camera with Mounting Base
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0°to 75°]
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
.
Pan Position
[0° to 360°]
Figure 2-5 3-axis Adjustment
Type II Camera
Rotation Position
[0°to 360°]