Ganz ZC-BX8922NBA Kullanım Kılavuzu - Sayfa 2
Güvenlik Kamerası Ganz ZC-BX8922NBA için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ganz ZC-BX8922NBA 2 sayfaları. Outdoor color camera 600tvl high resolution
Sayfayı Yazdır
INSTALLATION
Surface mount
Flush mount
(embedding in ceiling or wall)
* Mounting
Adaptor Ring
(optional)
* Camera Unit
(Attaching to a gang box)
*
Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING : Do not
release your hands
from the camera
unit until securing it.
Please use fixing screws suitable for the material of the ceiling or wall when
attaching the camera body. The mounting screws provided are not recommended
to use at all conditions.
Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mounting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
ADJUSTMENT
1. Direction and Lens
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
1)
2)
3)
Attention
T
he picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may depending on the
view angles.
It is not recommended to view through the circledd vertical
area especiallly witth LED light trurned on as the picture
image is subject to a LED light reflection.
Since these image deterionration is normal, installers are
encouraged to check the image under LED-ON environment
at the time of installation in order to avoid unexpected image
deterioration.
2. OSD Switch and OSD Menu
Use the Multi Tact Switch within the camerra
Direction and Enter Guide
Enter
Up
Left
Right
Down
OSD MENU FUNCTION
LENS
DC
MANUAL
EXPOSURE
SHUTTER BRIGHTNESS
AGC
DWDR
WHITE BAL
ATW1 ATW2
AWC -> SET
MANUAL
BACKLIGHT
OFF
BLC
HLC
DAY&NIGHT
AUTO
COLOR
B/W
EXT
CAM TITLE
MOTION
PRIVACY
IMAGE ADJ
SPECIAL
DPC
LANGUAGE
VERSION
RESET
FACTORY
EXIT
* START SET UP MENU
Press the Middle Multi Tact Switch, the main setup menu is displayed
on the monitor screen
SETUP
Select the function
LENS
DC
EXPOSURE
* A function with the icon
by using the switch
WHITE BAL
ATW1
has sub menus.
BACKLIGHT
OFF
Up
DAY&NIGHT
AUTO
To select a sub menu,
SPECIAL
select a function with
RESET
Down
the icon and press
EXIT
Enter
1) LENS
Turn the Switch toward Left or Right side, Select DC or MANUAL
Left
* Simply make the adjustment
SETUP
in the following order to help
SETUP
make the focusing easier:
LENS
DC
MANUAL
EXPOSURE
WHITE BAL
ATW1
- Select MANUAL
BACKLIGHT
OFF
- Adjust lens focus well
DAY&NIGHT
AUTO
SPECIAL
- Then return to DC
RESET
EXIT
2) EXPOSURE
SHUTTER
SETUP
SHUTTER
AUTO
NTSC: 1/60, PAL: 1/50
LENS
DC
FLK
EXPOSURE
1/250 ~1/100,000
WHITE BAL
ATW1
BRIGHTNESS
BACKLIGHT
OFF
BRIGHTNESS
000 ~ 255
DAY&NIGHT
AUTO
*darker
brighter
SPECIAL
RESET
EXIT
DWDR
DWDR
OFF
Attention
BRIGHTNESS adjusts DC level of the lens
3) WHITE BALANCE
SETUP
ATW1
(wider range)
LENS
DC
(narrower range)
ATW2
EXPOSURE
AWC->SET
WHITE BAL
ATW1
MANUAL
BACKLIGHT
OFF
DAY&NIGHT
AUTO
WB MANUAL
INDOOR
SPECIAL
RESET
OUTDOOR
EXIT
MANUAL BLUE
RED
4) BACKLIGHT
AREA SEL.
AREA 1 AREA 2
BLC
AREA STATE
ON
OFF
SETUP
000~255
GAIN
LENS
DC
HEIGHT
000~010
EXPOSURE
WIDTH
000~009
WHITE BAL
ATW1
LEFT/RIGHT
000~011
BACKLIGHT
OFF
TOP/BOTTOM
000~010
DAY&NIGHT
AUTO
SPECIAL
LEVEL
000~255
HLC
RESET
MODE
ALL DAY
NIGHT ONLY
EXIT
Attention
When select BLC, AREA 1 always turns on
5) DAY&NIGHT
D->N LEVEL
SETUP
D->N DELAY
AUTO
N->D LEVEL
LENS
DC
N->D DELAY
EXPOSURE
WHITE BAL
ATW1
WARNING
BACKLIGHT
OFF
COLOR
DAY&NIGHT
AUTO
SPECIAL
BURST
BW
RESET
IR SMART
EXIT
IR LEVEL
EXT
6) SPECIAL
* SPECIAL SUB MANU LIST
SETUP
SPECIAL
LENS
DC
CAM TITLE
EXPOSURE
MOTION
WHITE BAL
ATW1
PRIVACY
BACKLIGHT
OFF
IMAGE ADJ.
DAY&NIGHT
AUTO
DPC
SPECIAL
LANGUAGE
RESET
VERSION
EXIT
RETURN
Right
MOTION DETECTION
SPECIAL
AREA SEL.
AREA STATE
CAM TITLE
ON
HEIGHT
MOTION
ON
PRIVACY
OFF
WIDTH
IMAGE ADJ.
LEFT/RIGHT
DPC
TOP/BOTTOM
LANGUAGE
ENGLISH
DEGREE
VERSION
10 10 21
VIEW
RETURN
RET
PRIVACY MASKING
AREA SEL.
SPECIAL
AREA STATE
CAM TITLE
ON
HEIGHT
MOTION
OFF
PRIVACY
WIDTH
ON
IMAGE ADJ.
LEFT/RIGHT
DPC
TOP/BOTTOM
LANGUAGE
ENGLISH
COLOR
VERSION
10 10 21
RETURN
RET
Attention
ON
000
~ 063
IMAGE ADJUST
SPECIAL
LENS SHAD.
2DNR
CAM TITLE
ON
MIRROR
MOTION
ON
PRIVACY
OFF
FONT COLOR
IMAGE ADJ.
CONTRAST
DPC
SHARPNESS
LANGUAGE
ENGLISH
DISPLAY
VERSION
10 10 21
NEG. IMAGE
RETURN
RET
* LENS SHAD : LENS SHADING COMPENSATION
* 2 DNR : DIGITAL NOISE REDUCTION(2D)
* NEG IMAGE : NEGATIVE IMAGE
000~255
000~255
7) RESET & EXIT
SETUP
LENS
DC
EXPOSURE
WHITE BAL
ATW1
BACKLIGHT
OFF
DAY&NIGHT
AUTO
SPECIAL
RESET
FACTORY
EXIT
*DDN
*TDN
005~224
020~224
1 SEC~
60SEC
000~219
000~204
1 SEC~
60SEC
Do not change the above factory-set levels
ON OFF
ON
OFF
HIGH LOW
IR GAIN
000~255
000~008
HEIGHT
WIDTH
000~013
LEFT/RIGHT
000~005
TOP/BOTTOM
000~009
ON
OFF
* CAMERA TITLE
OFF
ON
OFF
ON
* DEAD PIXEL
COMPENSATION
ENGLISH
中文
10 10 21
* UPDATE VERSION
RET
AREA 1~ AREA 4
ON OFF
000 ~ 013
000 ~ 013
000 ~ 011
000 ~ 011
000 ~ 255
ON OFF
AREA 1~ AREA 8
ON OFF
000 ~108
000 ~180
000 ~167
000 ~092
000 ~015
When select ON,
AREA 1 always turns on
000 ~ 255
OFF ON
RETURN
ON OFF
ON OFF
FONT
000 ~ 255
ID&TITLE
000 ~ 255
000~255
000~031
LCD
* GAMMA
CRT
* PED LEVEL
USER
* COLOR GAIN
ON OFF
RESSET
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp