Brite View BV-210 Kullanıcı Kılavuzu - Sayfa 9

Adaptör Brite View BV-210 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brite View BV-210 13 sayfaları.

4. E

PLC N

NCRYPTED

ETWORK

The Powerline bridges are compliant HomePlug AV specification. Every 'HomePlug AV'

compliant PLC device that has the same default network name, "HomePlug AV", is capable of

communicating with other "HomePlug AV" devices. This is so called the "Public Network". Two

or more powerline devices under the same network can communicate with one another.

If you have a pair of powerline device, either one in the pair can be "device A" or "device B". By

pressing the GROUP button more than 10 seconds; it will generate a random network group

(different from HomePlug AV). Users can take the following two steps to change the public

network group to the private network group to protect their data while transmitting over the

powerline. Users also can create more than one private network groups by pressing GROUP

button directly without software installation required.

*NOTE: Put the devices side by side will be more convenient during the setting procedure. After network group is set,

the devices can be deployed anywhere at home.

Step I: Clear Group Attribute

Clear the original network group of device B by pressing its GROUP button more than 10

seconds until all LED lights simultaneously turns off and on once. At this moment, its network

group name has been changed to a random name. It means that this device is (1) ready to be

assigned another network name or (2) to be used as a seed device so other PLC devices

can join to a private network group.