Ganz ZC-DWN5840NXA Kullanım Kılavuzu - Sayfa 3

Güvenlik Kamerası Ganz ZC-DWN5840NXA için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ganz ZC-DWN5840NXA 12 sayfaları. Mini dome camera

SAFETY PRECAUTIONS

The installation should be made by a qualified service person and should conform

to all local codes. For this device provided no power switch, the installation shall

be carried out in accordance with the rules of the country or the region in which the

equipment is to be installed.

This symbol indicates that there is a possibility of death or damage to operator

or others.

(1) Use only 24V AC power supply marked class 2 or +12V DC regulated power

supply marked class 2.

(2) To prevent fire or electrical shock, UL listed class 2 wiring should be used for

the 12V DC or 24V AC input terminal.

(3) Be sure to connect each lead to the appropriate terminal. Wrong connection

may cause malfunction and/or damage to the video camera.

(4) Never attempt to disassemble or modify the camera.

(5) If an abnormality should occur, immediately turn off the power and consult your

dealer.

(6) To prevent fire or electric shock, do not expose this product to rain or moisture.

This symbol indicates that there is a possibility of injury or damage to equip-

ment.

(1) Do not attempt to aim the camera at the sun or other extremely bright objects

that cause smear to appear irrespective of whether the camera is operating or

not. This can damage the CCD (Charge Coupled Device).

(2) Do not place the camera in the following locations.

1 Locations subject to extremely high or low temperatures.

(Operating temperature range: -10°C to +50°C {14°F to 122°F})

(Storage temperature range: -20°C to +60°C {-4°F to 140°F})

2 Locations subject to high levels of humidity and dust.

(Operating humidity range: max 85% {No condensation})

(Storage humidity range: max 95% {No condensation})

3 Locations where there are large amounts of water vapor and steam.

(3) Ensure the location selected is sufficiently strong enough to support the weight

of the camera and is free from vibration.

(4) When this camera is installed near equipment that emits a strong electromag-

netic field, some irregularity such as noise on the monitor screen may happen.

(5) Do not allow the camera to be subjected to strong impacts or shocks. The

camera could be damaged by improper handling or storage.

This device complies with Part 15 of the FCC Rules. Operation is subject to

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Industry Canada's Compliance Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du

Canada.

EG-3