IKEA W10018030A Kurulum Talimatları ve Kullanım & Bakım Kılavuzu - Sayfa 8

Havalandırma Davlumbazı IKEA W10018030A için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım & Bakım Kılavuzu indirin. IKEA W10018030A 28 sayfaları. 90 cm wall-mount canopy range hood

Sayfayı Yazdır

Vent Cover Bracket Installation

Installations using telescoping upper and lower vent cover

assembly

1. Position vent cover bracket on wall about ¹⁄₈" (3 mm) away

from the ceiling.

2. Mark the hole locations.

A. Vent cover bracket

B. Mounting hole locations

C. Centerline on wall

3. Drill ³⁄₈" (9.5 mm) holes for wall anchors and insert anchors

flush with the wall.

Vent Cover Bracket Assembly and Installation

4. Assemble the 3 pieces of the vent cover bracket using

four 4 x 8 mm screws provided. The assembled bracket

should be sized to fit inside the upper vent cover.

A. Vent cover bracket assembly

B. Upper vent cover

C. 4 x 8 mm screws

D. Adjustable width

5. Install vent cover bracket to wall about ¹⁄₈" (3 mm) away from

the ceiling with drywall anchors and 6 x 70 mm screws

supplied.

A. Vent cover bracket

B. Centerline on wall

Non-vented (recirculating) Installation

1. Assemble the 3 parts of the deflector with two 3.5 x 9.5 mm

screws provided. The assembled deflector should be sized to

fit the width of the vent cover bracket installed earlier.

A. Vent cover bracket width

B. Deflector

C. 3.5 x 9.5 mm screws

2. Connect the deflector to the vent cover bracket using

four 3.5 x 9.5 mm screws provided.

A. Vent cover bracket

B. 3.5 x 9.5 mm screws

3. Measure length of 6" (15.2 cm) vent needed to connect the

transition to the deflector.

NOTE: Vent should fit up inside deflector a minimum of

1" (2.5 cm) minimum.

4. Install vent between the transition and the deflector.

5. Seal all connections with clamps.