HIKVISION TURBO HD D0T PIR Series Kullanıcı Kılavuzu - Sayfa 15
Güvenlik Kamerası HIKVISION TURBO HD D0T PIR Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION TURBO HD D0T PIR Series 16 sayfaları.
Sayfayı Yazdır
ALARM
In the !Ώ!ΫΕ mode, you can select the !Ώ!ΫΕ ΕΜDE
as ίΜΏD, or FΏ!ίHΖG;
ίΜΏD
Select the !Ώ!ΫΕ ΕΜDE as ίΜΏDΩ In this way, the
white light source turns on, when the PIR module
received the alarm signal;
In the εΕE ίEεεΖG you can set the time as 5 s, 10 s,
15 s, 30 s, or 60 s, which means that the solid mode
stays for the set time when the camera received one
alarm signal;
Note:
The solid mode will be stayed for another set time
when second alarm signal is received, and the rest can
be done in the same way;
FΏ!ίHΖG
Select the !Ώ!ΫΕ ΕΜDE as FΏ!ίHΖG; In this way, the
white light source flashes when the PIR module
received the alarm signal;
LIGHTING
Select the ΏGHεΖG mode, the embedded white light
source turns on in poor light conditions automatically;
You can set the ΏGHεΖG ΕΜDE as ίΜΏD or
FΏ!ίHΖG;
ίΜΏD
The white light source turns on in the poor light
conditions;
FΏ!ίHΖG
When you select the ΏGHεΖG ΕΜDE as FΏ!ίHΖG,
you can set the εΫGGEΫ ΕΜDE as !ΕEΫ, or DτΫ;
The white light source flashes in the poor light
conditions when receiving the alarm signal;
TRIGGER MODE
DτΫ
Select the εΫGGEΫ ΕΜDE as DτΫ; In this way, the
alarm signal is sent from the DVR, and the camera
works as the alarm detector in the process; esides, the
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
FUNCTIONS
WHITE LIGHT
TRIGGER MODE
ALARM MODE
TIME SETTING
PIR LEVEL
BACK
EXIT
SAVE & EXIT
Figure 3-6 !L!RM MODE
FUNCTIONS
WHITE LIGHT
LIGHTING MODE
PIR LEVEL
BACK
EXIT
SAVE & EXIT
Figure 3-7 SOLID
FUNCTIONS
WHITE LIGHT
LIGHTING MODE
TRIGGER MODE
PIR LEVEL
BACK
EXIT
SAVE & EXIT
Figure 3-8 FL!SHING
ALA RM
C AM ER A
SO LI D
15 S
3
LI G H TI N G
SO LI D
3
LI G H TI N G
FLAS HI N G
C AM ER A
3