Ganz digimaster DR-8FX2 Kurulum Kılavuzu - Sayfa 16
DVR Ganz digimaster DR-8FX2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Ganz digimaster DR-8FX2 17 sayfaları. Digimaster series 4ch;8ch;16ch
Sayfayı Yazdır
INSTALLATION
Network Connection
PC connection in the local network
You can connect DVR to a PC in the same network and control or manipulate it on the PC monitor.
Camera
Local PC
Connect the [ETHERNET] port in the rear panel to the router or hub.
1.
2.
Connect the local PC to the router or hub.
Local PC
3.
Enter the address in the Web browser of the local PC in the format of
"http://IP address:web service port ".(Ex : http://192.168.
1.23:8080) The web service port is set to 8080 by default. From the Network Setup screen,
you can change the port number.
4.
Provide the ID and password before logging in. Then, you can view the monitoring screen.
Access ID (factory default) : ADMIN, P/W : 1234.
For the security purpose, change the password before you use the product for the
first time after purchasing it.
Broadband Router
Or
Hub
Local PC
Broadband Router or Hub
Local PC
１６