HIKVISION TURBO HD DS-2CE56H0T-VPITE Kullanıcı Kılavuzu - Sayfa 9
Güvenlik Kamerası HIKVISION TURBO HD DS-2CE56H0T-VPITE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION TURBO HD DS-2CE56H0T-VPITE 16 sayfaları. Turbo hd turret & dome camera
Sayfayı Yazdır
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
Tilt Position
[0°to75°]
1). Hold the camera body and rotate the enclosure to
adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.3 Installation of Type I and Type II Camera
2.3.1 Ceiling/Wall Mounting with Junction Box
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-13 Secure the Camera
Figure 2-14 3-axis Adjustment
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]