KitchenAid KD-21A SERIES Kurulum Talimatları Kılavuzu - Sayfa 3
Bulaşık Makinesi KitchenAid KD-21A SERIES için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. KitchenAid KD-21A SERIES 16 sayfaları.
Sayfayı YazdırBEFORE STARTING:
Please read these installation
instructions
COMPLETELY
AND CAREFULLY.
They will save you time, work, and
help to ensure optimum dishwasher
performance.
For Replacement
Installation
-
Review these complete instructions
to be sure that previous connections
are
compatible.
For New Installations
- Plumbing and electrical connections
must be provided before the dishwasher
is moved
into place.
These instructions
are intended for use by qualified workers who will observe all local codes and ordinances
for
plumbing
connections
as well as local codes and/or the national Electrical
Code for electrical
connections.
YOU WILL NEED THESE TOOLS:
Phillips Screwdriver
Flat Blade Screwdriver
Adjustable
Wrenches (2) (if copper fittings are used)
Pipe Wrenches
(2) (if galvanized
or iron fittings are used)
Nut Driver or Socket Set
Wire Cutters
Tape Measure
Spirit/Bubble
Level
Electric Drill
1" Drill Bit or Hole Saw
Square
.
.
.
AND THESE MATERIALS:
112"
OD Copper Tubing (of sufficient
length for your installation),
Shut-off Valve, and Fittings (for copper water
supply line)
3/g" Pipe (of sufficient
length for your installation),
Shut-off Valve, and Fittings (for galvanized
water supply line)
3%~" NPT Street Elbow (you will need 2 for galvanized
water supply line) or 90° Compression
Elbow (3%" NPT
one end, for copper water supply line) See Fig. 13 page. 10.
g/I6" ID Heat and Detergent Resistant Rubber Hose and Clamps or5/g" OD Copper Tubing and Fittings (of sufficient
length to accommodate
your drain line)
10" Length of s/a" OD Soft Copper Tubing, Formed Into a Semicircle (if high loop drain is required - see page 7)
115 Volt, 15 Amp, 2 Wire, Properly Grounded,
Branch Circuit
-3-