HIKVISION TurboHD DS-2CE16H0T-AIT3ZF Kullanıcı Kılavuzu - Sayfa 7
Güvenlik Kamerası HIKVISION TurboHD DS-2CE16H0T-AIT3ZF için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION TurboHD DS-2CE16H0T-AIT3ZF 15 sayfaları. Bullet and turret camera
Ayrıca HIKVISION TurboHD DS-2CE16H0T-AIT3ZF için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Figure 2-5 Fix the Camera to the Ceiling
7. Route the cables through the cable hole, or the side
opening of the junction box.
8. Combine the junction box cover with its body.
Figure 2-6 Fix the Junction Box Cover back to its Body
9. Refer to step 6 of 2.1.1 Ceiling Mounting without
Junction Box to complete the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling Mounting without Junction Box
Before you start:
Both wall mounting and ceiling mounting are suitable
for the bullet camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the place where you want
to install the camera.
2. Drill the screw holes according to the drill template
and the cable hole (optional) in the ceiling.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Loosen screws to remove the clip plate, and take out
the main body.
Junction
Box Body
Screw
Figure 2-7 Drill Template