Ganz ZC-BT SERIES Kullanım Kılavuzu

IP Kamera Ganz ZC-BT SERIES için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ganz ZC-BT SERIES 2 sayfaları. Outdoor color camera
Ayrıca Ganz ZC-BT SERIES için: Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır

CONNECTING the cables

Connect the power and video cables

Connect the video cable from the monitor and the coaxial video cable attached to

the camera body

In case of using DC 12V, connect DC jack from camera with power supply

(CLASS 2 ONLY) If necessary, after connecting DC jack from Camera

to " Additional power connector(Accessory)" connect it with power supply.

In case of using AC 24V, after connecting DC jack from camera to

"Additional power connector(accessory)" connect it with power supply

(CLASS ONLY 2)

Attention

Specification below is recommended as an Output rated capacity of Power supply

that is connected to camera

650mA±10%

500mA±10%

Attention

Be sure to check that the cables are connected correctly before turning on

the power.

Turning on the power when the cables are connected with incorrect polarity

may damage the camera .

English

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the products covered by the European

Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste

stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of

your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more

detailed information

About disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Franç a is/French

Élimination de votre ancien appareil

1. Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne

2002/96/EC. 2. Tous les produits électriques et électroniques doivent être éliminés séparément de la chaîne de collecte municipale des

ordures, par l' intermédiaire des installations de collecte prescrites et désignées par le gouvernement ou les autorités locales. 3. Une

élimination conforme aux instructions aidera à réduire les conséquences negatives et risques éventuels pour ironnement et la santé

humaine. 4. Pour plus d'informations concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des

ordures ménagères ou encore le magasin où vous avez acheté ce produit.

Deutsch/German

Entsorgung von Altgeräten

1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der

europäischen Richtlinie 2002/96/EC. 2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über die dafür staatlich

vorgesehenen Stellen entsorgt werden. 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und

eine Gefährdung der rsönlichen Gesundheit. 4. Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwal-

tung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben.

Italiano/Italian

RAEE: SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE

1. Quando il simbolo del "Cassonetto Barrato" è apposto su un prodotto, significa che lo stesso può ricadere nei termini previsti dalla

Direttiva Europea nr. 2002/96/EC in funzione dell'attuazione definita dalla Legislazione dei singoli stati membri dell'Unione Europea. 2.

Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali, tramite appositi ontenitori, approvati

dall'Amministrazione Comunale o dalle Autorità Locali.

3. Il corretto smaltimento delle vostre vecchie apparecchiature, contribuirà a prevenire possibili conseguenze di impatto egativo sull'

ambiente e per la salute dell'uomo. 4. Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature, siete pregati di

contattare l'ufficio municipale della vostra città, il servizio di smaltimento rifiuti o il punto vendita nel quale avete acquistato il prodotto.

Polski/Polish

Utylizacja starych urządzeń

1. Kiedy do produktu dołączony jest niniejszy przekreślony symbol kołowego pojemnika na śmieci, oznacza to, że produkt jest objęty

europejską dyrektywą 2002/96/EC. 2. Wszystkie elektryczne i elektroniczne produkty powinny być utylizowane niezależnie od odpadów

miejskich, zwykorzystaniem przeznaczonych do tego miejsc składowaniawskazanych przez rząd lub miejscowe władze. 3. Właściwy

sposób utylizacji starego urządzenia pomoże zapobiec potencjalnie negatywnemu wpływowi na zdrowie i środowisko. 4. Aby uzyskać

więcej informacji o sposobach utylizacji starych urządzeń, należy skontaktować się z władzami lokalnymi, przedsiębiorstwem zajmującym

się utylizacją odpadów lub sklepem, w którym produkt zostałkupiony.

Português/Portuguese

Eliminação do seu antigo aparelho

1. Quando este símbolo de latão cruzado estiver afixado a um produto, significa que o produto é abrangido pela Directiva Europeia

002/96/EC. 2. Todos os produtos eléctricos e electrónicos devem ser eliminados separadamente da coleta de lixo municipal através de

pontos de recolha designados, facilitados pelo governo ou autoridades locais. 3. A eliminação correcta do seu aparelho antigo ajuda a

evitar potenciais onsequências negativas para o ambiente e para a saúde humana. 4. Para obter informaçõs mais detalhadas acerca da

eliminação do seu aparelho antigo, contacte as autoridades locais, um service de eliminação de resíduos ou a loja onde comprou o

produto.

Español/Spanish

Cómo deshacerse de aparatos eléctricos y electrónicos viejos

1. Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/EC.2.

Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través

de puntos de recogida designados por el gobierno o las autoridades locales. 3. La correcta recogida y tratamiento de los dispositivos

inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4. Para obtener más información sobre

cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de

basuras o el establecimiento donde adquirió el producto.

for PAL models

CBC Co.,Ltd

Tokyo, Japan

www.GANZ.jp

PART DESCRIPTION

ZC-BT series

* Unscrew the Front Cover counter-clockwise to open the unit for adjustments. Once

adjusted, screw the Front Cover back and tighten it clockwise, and refrain from opening

and closing frequently to ensure the best water-proof and condensation free perfor-

mance.

1. IR LED

Sync System Slide Switch

2. Photo Sensor

9. Service Jack Socket

3. Front Cover

10. Locking Ring(body)

4. Sunshield

11. Locking Ring(bracket)

5. Focus Adjustment Lever

12. Mounting Base

6. View Angle Adjustment Lever

13. Video Output Connector

7. Multi Tact Switch for OSD control

14. Power Input Jack

* Option

1. Service Monitor cable

2. Heater

3. Lens variations

(Please contact your dealers for more details)

ZC-BX series

*Caution : ZC-BX housing is desinged to adjust focus and focal length externally. Once

Front Cover is unlocked for any reason, its outdoor performance can not be guaranteed.

1. IR LED

2. Photo Sensor

3. Front Cover

4. Sunshield

5. Exterior Focus Adjustment Screw

6. Exterior View Angle Adjustment Screw

7. Locking Ring (body)

8. Locking Ring (bracket)

9. Mounting Base

10. Video Output Connector

11. Power Input Jack

12. Multi Tact Switch for OSD control

* Option

1. Heater

2. Lens variations

(Please contact your dealers for more details)

MODELS

Lens Specification

D/N

Aperture

View Angle

NTSC

Focal Length

Digital

1:1.2~2.1

ZC-BT/BX8039NXA

3~9mm

90~31.8

True

1:1.4~2.4

ZC-BNT/BNX8039NXA

Digital

ZC-BT/BX8312NXA

89.8~23.9

3.3~12mm

1:1.4~2.9

True

ZC-BNT/BNX8312NXA

Digital

ZC-BT/BX8922NXA

9~22mm

1:1.4~1.6

32.1~13.1

True

ZC-BNT/BNX8922NXA

* Optional Heater models : suffix "-H" to the above model names(such as ZC-BT8039PXA-H)

PRODUCT FEATURES

-. 1/3" SONY EXview HAD-II CCD

-. Built-in "COMPUTAR " Vari-Focal Lens

-. True or Digital Day & Night

-. Auto-sensing DC12V/AC24V Dual-Voltage Operation

-. Digital WDR(Wide Dynamic Range)

-. Back Light Compensation

-. High Light Compensation

-. Motion Detection

-. Privacy Masking

-. 2D Digital Noise Reduction (2DNR)

-. IR Optimizer

-. Low Power Consumption

-. Multi Tact Switch for OSD control

-. Slide Switch for Sync. System selection

SPECIFICATION

TV System

NTSC

Scanning System

2 : 1 Interlace

1/3" Type Inter line transfer CCD(Sony EXview HAD II CCD)

Image Sensor

Effective Elements

976(H) x 494(V)

Scanning Frequency

15.734kHz(H) x 59.94Hz(V)

Video Output

1.0Vp-p/75Ω

Horizontal Resolution

700 TVL

Minimum Ilumination

0lx (B/W Mode/LED On)

Day/Night

Digital or True Day/ Night

S/N Ratio

More than 50dB(at minimum AGC gain)

0.45

Gamma Characteristic

ZC-BT Series

Internal, Line Lock(Selectable)

Sync. System

ZC-BX Series

Internal only

1/60 sec, FLK,

Electronic Shutter

1/60 ~1/100,000(Selectable)

White Balance

ATW, PUSH, USER1, USER2, ANT CR, MANUAL, PUSH LOCK (Selectable)

AC24V±10% 60Hz±1Hz,

Power Supply

DC12V±10%

Power Consumption

6.5Watt (AC24V), 6.5 Watt (DC12V)

Ambient Temperature

Operation : -20°C to +50°C / Storage : -20°C to +60°C

Ambient Humidity

Operation : Max. 85%RH / Storage : Max. 95%RH

External Dimensions

209mm(L) X 72

(not included sun shield)

Weight

Approx. 750g(Included sun shield)

Multi Tact Switch for OSD control,

ZC-BT Series

Switch

Slide Switch for Sync. System selection(for BT models only)

ZC-BX Series

Multi Tact Switch for OSD control

Self-tapping Screw : 3ea, Template : 1ea,

Accessories

Instruction Manual : 1ea, Additional Power Connector: 1ea

The specifications and/or appearance of the product may change without a prior notice

OUTDOOR COLOR CAMERA

ZC-BT/BX 8000

Camera Models

INSTRUCTION MANUAL

PAL

ZC-BT/BX8039PXA

ZC-BNT/BNX8039PXA

ZC-BT/BX8312PXA

ZC-BNT/BNX8312PXA

ZC-BT/BX8922PXA

ZC-BNT/BNX8922PXA

700TVL High Resolution

Color / Day & Night

Edit : ZC-BTX8000_-700-X-DUAL V_150612_V1

Thank you for your purchase of this product. Before operating the product, please read this instruction manual

carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future

reference.

SAFETY PRECAUTIONS

PAL

The installation should be made by a qualified service person and should conform to all local codes.

WARNING

This symbol indicates that there is a possibility of death or damage to operator or others.

976(H) x 582(V)

To prevent fire or electric shock, do not expose this product to rain or moisture.

15.625kHz(H) x 50.00Hz(V)

Attention

This symbol indicates that there is a possibility of injury or damage to equipment.

(1) Use only AC24V power suppy marked class 2 or +DC12V regulated power supply marked class 2.

(2) To prevent fire of electrical shock, UL listed class 2 wiring should be used for the DC12V or AC24V input terminal.

(3) Be sure to connect each lead to the appropriate terminal, wrong connection may cause malfunction and/or

damage to the camera.

(4) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear

irrespective of whether the camera is operating or not. This can damage the CCD(Charge Coupled Device).

(5) Do not place the camera in the following location.

1) Locations subject to extremely high or low temperature.

(Operating temperature range : -20'C to +50'C {-4'F to 122'F}

(Storage temperature range : -20'C to +60'C{-4'F to 140'F})

1/50 sec, FLK,

2) Locations where there are large amounts of water vapor and steam.

1/50 ~1/100,000(Selectable)

(6) Ensure the location selected near equipment that emits a strong electromagnetic field, some irregularity such as

noise on the monitor screen may happen.

(7) When this camera is installed near equipment that emits a strong electromagnetic field, some irregularity such

AC24V±10% 50Hz±1Hz,

as noise on the monitor screen may happen.

DC12V±10%

(8) Be sure to use screws suitable for the type of material to which the camera is being mounted.

(9) Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper

handling or storage.

(10) Never attempt to disassemble or modify the camera.

(11) If an abnormality should occur, immediately turn off the power and consult your dealer.

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:(1)This

device may not cause harmful interference, and (2)This device must accept any interference received, including

interference that may cause undesired operation.

(for NTSC models)

The CE Marking is a Directive Conformity mark of t

(for PAL models)

SERIES

he European Union(EU)