Briteq BT-THEATRE 150EZ Mk2 Kullanım Kılavuzu - Sayfa 7
Aydınlatma Ekipmanları Briteq BT-THEATRE 150EZ Mk2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Briteq BT-THEATRE 150EZ Mk2 17 sayfaları.
Sayfayı Yazdır
ENGLISH
• 1CH DIM 8bit : 1 channel mode with 8bit dimmer. You can set a fixed beam angle with the function
FOCUS PRESET of the setup menu.
• 2CH D+S 8bit : 2 channel mode with 8bit dimmer and strobe. You can set a fixed beam angle with the
function FOCUS PRESET of the setup menu.
• 3CH D+S+F 8bit : 3 channel mode with 8bit dimmer, strobe and focus.
• 2CH DIM 16bit : 2 channel mode with 16bit dimmer. You can set a fixed beam angle with the function
FOCUS PRESET of the setup menu.
• 3CH D+S 16bit : 3 channel mode with 16bit dimmer and strobe. You can set a fixed beam angle with
the function FOCUS PRESET of the setup menu.
• 4CH D+S+F 16bit : 4 channel mode with 16bit dimmer, strobe and focus.
• Once the correct option shows on the display, press the ENTER button to confirm.
CHANNEL Mode
INFORMATION
FIXTURE Set –
Used to configure different parameters if the projector.
NO DMX Mode
Used to set how the projector reacts when the DMX-signal disappears.
• Press the ▲/▼ buttons until the desired function is showing on the display.
BRITEQ
®
LEVEL 1
DMX-Address
001 - XXX
1CH DIM 8bit
2CH D+F 8bit
2CH D+S 8bit
3CH D+S+F 8bit
2CH DIM 16bit
3CH D+S 16bit
4CH D+S+F 16bit
NO DMX Mode
STANDBY
FIXTURE Set
DIM Curve
Dimmer Speed
PWM frequency
FOCUS PRESET
FAN Set
Backlight
AUTO LOCK
DISPLAY Set
noDMX blink
Temp C/F
Factory Settings
DEFAULTS
USER Settings
Total LED Hours
Last JOB hours
LED Temp.
ERROR info
Model Name
Firmware V.
RDM UID
LEVEL 2
Blackout
Freeze
Manual
OFF, 01M-99M
Linear
Square
Inv. Square
S-Curve
000 – 255
(0-2000ms)
900Hz – 20kHz
000 - 255
Auto High Low
ON, 02-60M
ON /OFF
ON /OFF
Celcius/Fahrenheit
LOAD ?
LOAD / SAVE ?
xxxx Hrs
xxxx Hrs
xxx °C / F
xxxxxxxx
THEATRE150EZ Mk2
THEATRE250EZ Mk2
V x.xx
0x2122xxxxxxxx
5/13
BT-THEATRE 150EZ/250EZ Mk2
OPERATION MANUAL