DecoRad Handmate UV 1800 Kullanıcı Kılavuzu - Sayfa 16

Endüstriyel Ekipmanlar DecoRad Handmate UV 1800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DecoRad Handmate UV 1800 18 sayfaları.

6. Replacing lamp

Replacing UV lamp:

Caution: never touch a heated UV lamp!!

Step 1: Place the Handmate on a flat surface with the

lamp facing up.

Step 2: Disconnect from the power source.

Step 3: Remove the 13 screws with a socket wrench and

flip the bottom plate carefully to the side. Remove the old

UV lamp by pulling the ceramic parts of the lamp.

Step 4: Place new UV bulb by using a tissue.

Reassemble the 13 screws carefully, do not over tighten.

Handmate UV 1800 Firmware 2.9