Avantco 177CS20V Kullanıcı Kılavuzu - Sayfa 3

Ticari Gıda Ekipmanları Avantco 177CS20V için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 177CS20V 7 sayfaları. Churro stuffer

Assembly and

Installation

PLUNGER ASSEMBLY

1. Slide the Plunger Seal onto the Plunger

(figure 1).

2. Assemble the Pressure Release Valve Kit

onto the Plunger. From the top of the

Plunger, place the Washer onto the Valve

Hole, then insert the Screw through the

Washer and into the Valve Hole. From the

underside of the Plunger, place the Spring

onto the end of the Screw, then place the

Valve Cap onto the end of the Screw and

twist to secure.

3. Screw the Plunger Bolt onto the Plunger

Shaft (figure 2).

4. Place the assembled Plunger onto the end

of the Plunger Shaft (figure 3).

STUFFER ASSEMBLY

5. Attach the Handle by sliding it onto either

the Fast or the Slow Gear (figure 4).

6. Crank the Handle to bring the Plunger to

the top of the Stuffer.

...continuedonnextpage

www.AvantcoEquipment.com

User Manual