IKEA 404621690A Manuel - Sayfa 19

Bulaşık Makinesi IKEA 404621690A için çevrimiçi göz atın veya pdf Manuel indirin. IKEA 404621690A 23 sayfaları.

IKEA 404621690A Manuel
EN
PROBLEM
Stained tub
interior
Noises
Dishwasher won't
fill with water

Error codes

Error codes will display on the display window when the following errors occur:
CODE
i1
i4
id
CAUTION
• If overflow occurs, turn off the main water supply before calling a service
provider.
• If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
POSSIBLE CAUSES
Coffee and tea soil.
Reddish stain.
Detergent cup
opening\
Drain pump sound.
A hard object has
entered the wash
module. When the
object is ground up,
the sound should
stop.
Water valve is turn
off.
Door latch may not
be properly seated.
MEANING
Longer inlet time
Unit leaking
PCB communication
error
TROUBLESHOOTING
SOLUTIONS
Using an approved spot cleaner to
remove the soil.
Some tomato-based foods will
cause this, use of the rinse only
cycle right after loading this will
decrease the staining.
This is normal.
If the noise persists after a
complete cycle, call for service.X
Check if the water valve is turn on.
Make sure the door is closed.
POSSIBLE CAUSES
Faucets is not opened, or water intake
is restricted, or water pressure is too
low.
Some element of dishwasher leaks.
PCB issue, or wire connected to the
board issue.
19