IKEA BDW FINP 450 NE Kullanım Kılavuzu - Sayfa 23

Bulaşık Makinesi IKEA BDW FINP 450 NE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. IKEA BDW FINP 450 NE 36 sayfaları.

Sayfayı Yazdır
IKEA BDW FINP 450 NE Kullanım Kılavuzu
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash program (this could damage
ENGLISH
the water softener beyond repair).
As soon as this procedure is complete, run a program without
loading. The "Pre-Wash" program alone is NOT� � � � � �
Residual saline solution or grains of salt can lead to corrosion,
irreparably damaging the stainless steel components.
Make sure the cap is screwed on tightly, so that no detergent
The guarantee is not applicable if faults are caused by such
can get into the container during the wash program (this could
ENGLISH
damage the water softener beyond repair).
circumstances.
As soon as this procedure is complete, run a program without
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
ENGLISH
loading. The "Pre-Wash" program alone is NOT SUFFICIENT
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
heating element may be damaged as a result.
Make sure the cap is screwed on tightly, so that no detergent can
irreparably damaging the stainless steel components.
Whenever you need to add salt, it is mandatory to complete
get into the container during the wash program (this could damage
The guarantee is not applicable if faults are caused by such
Make sure the cap is screwed on tightly, so that no detergent can
the procedure before the beginning of the washing cycle.
the water softener beyond repair).
circumstances.
get into the container during the wash program (this could damage
ENGLISH
the water softener beyond repair).
As soon as this procedure is complete, run a program without
SETTING THE WATER HARDNESS
As soon as this procedure is complete, run a program without
Only use salt that has been specifically designed for
loading. The "Pre-Wash" program alone is NOT� � � � � �
To allow the water softener to work in a perfect way, it is essential
loading. The "Pre-Wash" program alone is NOT� � � � � �
dishwashers. If the salt container is not filled, the water
Residual saline solution or grains of salt can lead to corrosion,
Residual saline solution or grains of salt can lead to corrosion,
that the water hardness setting is based on the actual water hard-
softener and the heating element may be damaged
Make sure the cap is screwed on tightly, so that no detergent can
irreparably damaging the stainless steel components.
irreparably damaging the stainless steel components.
get into the container during the wash program (this could damage
ness in your house. This information can be obtained from your local
as a result of limescale accumulation. Using of Salt is
The guarantee is not applicable if faults are caused by such
The guarantee is not applicable if faults are caused by such
the water softener beyond repair).
recommended with any type of dishwasher detergent.
water supplier. The factory setting is for average (3) water hardness.
circumstances.
circumstances.
As soon as this procedure is complete, run a program without
Whenever you need to add salt, it is mandatory to complete
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
loading. The "Pre-Wash" program alone is NOT� � � � � �
• Switch on the appliance by pressing the ON/OFF button.
the procedure before the beginning of the washing cycle to
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• Switch off the appliance by pressing the ON/OFF button.
avoid corrosion.
heating element may be damaged as a result.
irreparably damaging the stainless steel components.
heating element may be damaged as a result.
• Hold down button
Whenever you need to add salt, it is mandatory to complete
The guarantee is not applicable if faults are caused by such
Whenever you need to add salt, it is mandatory to complete
Setting the water hardness
the procedure before the beginning of the washing cycle.
• Switch on the appliance by pressing the ON/OFF button.
circumstances.
the procedure before the beginning of the washing cycle.
To allow the water softener to work in a perfect way, it is
•
The current selection level number and the salt indicator light
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
SETTING THE WATER HARDNESS
essential that the water hardness setting is based on the actual
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � �
To allow the water softener to work in a perfect way, it is essential
water hardness in your house.
SETTING THE WATER HARDNESS
heating element may be damaged as a result.
•
Press button
to select the desired hardness level (see
that the water hardness setting is based on the actual water hard-
from your local water supplier. The factory sets the default
Whenever you need to add salt, it is mandatory to complete
To allow the water softener to work in a perfect way, it is essential
WATER HARDNESS TABLE).
ness in your house. This information can be obtained from your local
the procedure before the beginning of the washing cycle.
water hardness
that the water hardness setting is based on the actual water hard-
water supplier. The factory setting is for average (3) water hardness.
Water Hardness Table
ness in your house. This information can be obtained from your local
• Switch on the appliance by pressing the ON/OFF button.
SETTING THE WATER HARDNESS
• Switch on the appliance by pressing the ON/OFF button.
water supplier. The factory setting is for average (3) water hardness.
• Switch off the appliance by pressing the ON/OFF button.
To allow the water softener to work in a perfect way, it is essential
• Switch off the appliance by pressing the ON/OFF button.
Level
• Hold down button
that the water hardness setting is based on the actual water hard-
• Hold down button
• Switch on the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
• Switch on the appliance by pressing quickly the ON/OFF
• Switch on the appliance by pressing the ON/OFF button.
1
Soft
• Switch off the appliance by pressing the ON/OFF button.
water supplier. The factory setting is for average (3) water hardness.
button.
•
The current selection level number and the salt indicator light
• Hold down button
2
Medium
for 5 seconds, until you hear a beep.
• The current selection level number and the salt indicator light
� � � � � �
• Switch on the appliance by pressing the ON/OFF button.
•
Press button
to select the desired hardness level (see
• Switch on the appliance by pressing the ON/OFF button.
both flash
• Switch off the appliance by pressing the ON/OFF button.
3
Average
WATER HARDNESS TABLE).
• Press button
to select the desired hardness level (see
The current selection level number and the salt indicator light
•
• Hold down button
for 5 seconds, until you hear a beep.
4
Hard
WATER HARDNESS TABLE).
• Switch on the appliance by pressing the ON/OFF button.
� � � � � �
Water Hardness Table
•
The current selection level number and the salt indicator light
• Switch off the appliance by pressing the ON/OFF button.
•
Press button
to select the desired hardness level (see
5
Very hard
Level
� � � � � �
Setting is complete!
WATER HARDNESS TABLE).
•
Press button
to select the desired hardness level (see
• Switch off the appliance by pressing the ON/OFF button.
1
Soft
WATER HARDNESS TABLE).
Water Hardness Table
Water Hardness Table
Setting is complete!
2
Medium
Water Hardness Table
3
Level
Average
Level
Level
FILLING THE RINSE AID DISPENSER
German
4
Hard
1
Soft
degrees
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
1
5
Soft
Very hard
2
Medium
should be filled when the RINSE AID REFILL indicator light
2
Medium
1
Soft
• Switch off the appliance by pressing the ON/OFF button.
in the control panel is lit.
3
Average
3
Average
Setting is complete!
2
Medium
4
Hard
4
Hard
FILLING THE RINSE AID DISPENSER
3
Average
5
Very hard
5
Very hard
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
4
Hard
• Switch off the appliance by pressing the ON/OFF button.
should be filled when the RINSE AID REFILL indicator light
• Switch off the appliance by pressing the ON/OFF button.
Setting is complete!
in the control panel is lit.
5
Very hard
Setting is complete!
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Filling the rinse aid dispenser
FILLING THE RINSE AID DISPENSER
should be filled when the RINSE AID REFILL indicator light
B
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
in the control panel is lit.
1. Open the dispenser B by pressing and pulling up the tab on
should be filled when the RINSE AID REFILL indicator light
should be filled when the RINSE AID REFILL indicator light
the control panel is lit.
the lid.
in the control panel is lit.
2. Carefully introduce the rinse aid as far as the maximum
B
(110 ml) reference notch of the filling space - avoid spilling it.
1. Open the dispenser B by pressing and pulling up the tab on
If this happens, clean the spill immediately with a dry cloth.
the lid.
3. Press the lid down until you hear a click to close it.
2. Carefully introduce the rinse aid as far as the maximum
NEVER pour the rinse aid directly into the tub.
(110 ml) reference notch of the filling space - avoid spilling it.
If this happens, clean the spill immediately with a dry cloth.
B
3. Press the lid down until you hear a click to close it.
1. Open the dispenser B by pressing and pulling up the tab on
NEVER pour the rinse aid directly into the tub.
the lid.
2. Carefully introduce the rinse aid as far as the maximum
B
B
(110 ml) reference notch of the filling space - avoid spilling it.
1. Open the dispenser B by pressing and pulling up the tab on
1. Open the dispenser B by pressing and pulling up the tab on
If this happens, clean the spill immediately with a dry cloth.
the lid.
3. Press the lid down until you hear a click to close it.
the lid.
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum (110
2. Carefully introduce the rinse aid as far as the maximum
ml) reference notch of the filling space - avoid spilling it. If this
(110 ml) reference notch of the filling space - avoid spilling it.
happens, clean the spill immediately with a dry cloth.
If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
NEVER pour the rinse aid directly into the tub.
ENGLISH
for 5 seconds, until you hear a beep.
Product description
This information can be obtained
7
°dH
for 5 seconds, until you hear a beep.
8
German degrees
for 5 seconds, until you hear a beep.
0 - 6
7 - 11
12 - 17
18 - 34
9
35 - 50
°dH
German degrees
French degrees
0 - 6
0 - 10
7 - 11
11 - 20
°dH
12 - 17
21 - 30
°dH
°fH
°dH
°fH
German degrees
French degrees
French
18 - 34
31 - 60
German degrees
French degrees
0 - 6
degrees
0 - 6
35 - 50
0 - 10
61 - 90
7 - 11
7 - 11
11 - 20
0 - 6
0 - 10
12 - 17
12 - 17
21 - 30
7 - 11
11 - 20
18 - 34
31 - 60
18 - 34
11
12 - 16
21 - 29
35 - 50
61 - 90
35 - 50
17 - 34
30 - 60
35 - 50
61 - 90
Control panel
A
1
1.
On-Off/Reset button with indicator light
A
2.
Program selection button
3.
Salt refill indicator ligh
4.
Rinse Aid refill indicator ligh
A
A
5.
Program number and delay time indicator
6.
Tablet indicator light
First use
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the
dishes andon the machine's functional components.
The guarantee is not applicable if faults are caused by such
As soon as this procedure is complete, run a program without
circumstances.
loading. The "Pre-Wash" program alone is NOT� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Residual saline solution or grains of salt can lead to corrosion,
ADJUSTING THE DOSAGE OF RINSE AID
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
irreparably damaging the stainless steel components.
If you are not completely satisfied with the drying results, you can
heating element may be damaged as a result.
The guarantee is not applicable if faults are caused by such
adjust the quantity of rinse aid used.
Whenever you need to add salt, it is mandatory to complete
circumstances.
the procedure before the beginning of the washing cycle.
• Switch the dishwasher on using the ON/OFF button.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• Switch it off using the ON/OFF button.
SETTING THE WATER HARDNESS
heating element may be damaged as a result.
• Press button
To allow the water softener to work in a perfect way, it is essential
Whenever you need to add salt, it is mandatory to complete
• Switch it on using the ON/OFF button.
Adjusting the dosage of rinse aid
that the water hardness setting is based on the actual water hard-
the procedure before the beginning of the washing cycle.
•
The current selection level number and rinse aid indicator light flash.
ness in your house. This information can be obtained from your local
If you are not completely satisfied with the drying results, you
water supplier. The factory setting is for average (3) water hardness.
can adjust the quantity of rinse aid used.
•
Press button
SETTING THE WATER HARDNESS
• Switch the dishwasher on using the ON/OFF button.
s.
supplied.
To allow the water softener to work in a perfect way, it is essential
• Switch on the appliance by pressing the ON/OFF button.
• Switch it off using the ON/OFF button.
that the water hardness setting is based on the actual water hard-
• Switch it off using the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
• Press button
• Hold down button
Setting is complete!
ADJUSTING THE DOSAGE OF RINSE AID
water supplier. The factory setting is for average (3) water hardness.
• Switch it on using the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
If you are not completely satisfied with the drying results, you can
ADJUSTING THE DOSAGE OF RINSE AID
• The current selection level number and rinse aid indicator
•
The current selection level number and the salt indicator light
• Switch on the appliance by pressing the ON/OFF button.
supplied. The LOW RINSE AID indicator light will not be lit if you
If you are not completely satisfied with the drying results, you can
� � � � � �
adjust the quantity of rinse aid used.
light flash.
• Switch off the appliance by pressing the ON/OFF button.
run out of rinse aid. A maximum of 5 levels can be set according to
adjust the quantity of rinse aid used.
•
Press button
• Press button
• Switch the dishwasher on using the ON/OFF button.
• Hold down button
• Switch the dishwasher on using the ON/OFF button.
WATER HARDNESS TABLE).
the dishwasher model. The factory setting is specific to the model,
supplied.
• Switch on the appliance by pressing the ON/OFF button.
• Switch it off using the ON/OFF button.
• Switch it off using the ON/OFF button.
• Switch it off using the ON/OFF button.
please follow instruction above to check this for your machine.
•
The current selection level number and the salt indicator light
• Press button
• Press button
ADJUSTING THE DOSAGE OF RINSE AID
� � � � � �
• If you see bluish streaks on the dishes, set a low number (1-2).
Setting is complete!
• Switch it on using the ON/OFF button.
• Switch it on using the ON/OFF button.
Level
If you are not completely satisfied with the drying results, you can
•
Press button
• If there are drops of water or limescale marks on the dishes,
•
The current selection level number and rinse aid indicator light flash.
•
The current selection level number and rinse aid indicator light flash.
If the rinse aid level is set to ZERO, no rinse aid will be supplied.
WATER HARDNESS TABLE).
adjust the quantity of rinse aid used.
set a high number (3-4).
•
Press button
1
•
Press button
The LOW RINSE AID indicator light will not be lit if you run out
• Switch the dishwasher on using the ON/OFF button.
s.
supplied.
s.
of rinse aid. A maximum of 5 levels can be set according to the
supplied.
• Switch it off using the ON/OFF button.
2
Medium
• Switch it off using the ON/OFF button.
• Press button
dishwasher model. The factory setting is specific to the model,
three times - a beep will be heard.
• Switch it off using the ON/OFF button.
Level
3
Average
Setting is complete!
FILLING THE DETERGENT DISPENSER
• Switch it on using the ON/OFF button.
please follow instruction above to check this for your machine.
Setting is complete!
4
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
•
The current selection level number and rinse aid indicator light flash.
1
• If you see bluish streaks on the dishes, set a low number (1-2).
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
supplied. The LOW RINSE AID indicator light will not be lit if you
•
Press button
to select the level of rinse aid quantity to be
5
Very hard
• If there are drops of water or limescale marks on the dishes,
2
Medium
dishwashers.
run out of rinse aid. A maximum of 5 levels can be set according to
supplied.
supplied. The LOW RINSE AID indicator light will not be lit if you
s.
set a high number (3-4).
3
To achieve the best washing and drying results, the combined
Average
the dishwasher model. The factory setting is specific to the model,
• Switch it off using the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
run out of rinse aid. A maximum of 5 levels can be set according to
please follow instruction above to check this for your machine.
useof detergent, rinse aid liquid and refined salt is required.
Setting is complete!
Setting is complete!
4
the dishwasher model. The factory setting is specific to the model,
Filling the detergent dispenser
• If you see bluish streaks on the dishes, set a low number (1-2).
We recommend using detergents that do not contain phosphates
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
5
Very hard
please follow instruction above to check this for your machine.
To achieve the best washing and drying results, the combined
• If there are drops of water or limescale marks on the dishes,
FILLING THE RINSE AID DISPENSER
supplied. The LOW RINSE AID indicator light will not be lit if you
or chlorine, as these products are harmful to the environment.
useof detergent, rinse aid liquid and refined salt is required. We
• If you see bluish streaks on the dishes, set a low number (1-2).
set a high number (3-4).
run out of rinse aid. A maximum of 5 levels can be set according to
• Switch off the appliance by pressing the ON/OFF button.
Good washing results also depend on the correct amount of
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
recommend using detergents that do not contain phosphates
• If there are drops of water or limescale marks on the dishes,
the dishwasher model. The factory setting is specific to the model,
Setting is complete!
should be filled when the RINSE AID REFILL indicator light
detergent being used.
°fH
or chlorine, as these products are harmful to the environment.
set a high number (3-4).
please follow instruction above to check this for your machine.
FILLING THE DETERGENT DISPENSER
in the control panel is lit.
Good washing results also depend on the correct amount of
French degrees
Exceeding the stated amount does not result in a more effective
• If you see bluish streaks on the dishes, set a low number (1-2).
FILLING THE RINSE AID DISPENSER
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
detergent being used.
• If there are drops of water or limescale marks on the dishes,
wash and increases environmental pollution.
0 - 10
dishwashers.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Exceeding the stated amount does not result in a more effective
set a high number (3-4).
FILLING THE DETERGENT DISPENSER
The amount can be adjusted to the soil level. In the case of
To achieve the best washing and drying results, the combined
should be filled when the RINSE AID REFILL indicator light
11 - 20
wash and increases environmental pollution. The amount can
normally soiled items, use approximately either 35g (powder
useof detergent, rinse aid liquid and refined salt is required.
in the control panel is lit.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
be adjusted to the soil level. In the case of normally soiled items,
21 - 30
FILLING THE DETERGENT DISPENSER
We recommend using detergents that do not contain phosphates
detergent) or 35ml (liquid detergent) and additional tea spoon of
dishwashers.
use approximately either 25g (powder detergent) or 25ml (liquid
or chlorine, as these products are harmful to the environment.
detergent directly inside the tub. If tablets are used, one tablet
31 - 60
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
To achieve the best washing and drying results, the combined
detergent) and additional tea spoon of detergent directly inside
Good washing results also depend on the correct amount of
dishwashers.
will be enough.
the tub. If tablets are used, one tablet will be enough.
useof detergent, rinse aid liquid and refined salt is required.
61 - 90
detergent being used.
°fH
To achieve the best washing and drying results, the combined
If the crockery is only lightly soiled or if it has been rinsed with
If the crockery is only lightly soiled or if it has been rinsed
We recommend using detergents that do not contain phosphates
Exceeding the stated amount does not result in a more effective
useof detergent, rinse aid liquid and refined salt is required.
1. Open the dispenser B by pressing and pulling up the tab on
with water before being placed in the dishwasher, reduce the
water before being placed in the dishwasher, reduce the amount
or chlorine, as these products are harmful to the environment.
wash and increases environmental pollution.
We recommend using detergents that do not contain phosphates
the lid.
amount of detergent used accordingly (minimum 25 g/ml) e.g.
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
Good washing results also depend on the correct amount of
The amount can be adjusted to the soil level. In the case of
or chlorine, as these products are harmful to the environment.
2. Carefully introduce the rinse aid as far as the maximum
skip the powder/gel putted inside the tub.
powder/gel putted inside the tub.
normally soiled items, use approximately either 35g (powder
Good washing results also depend on the correct amount of
detergent being used.
°fH
(110 ml) reference notch of the filling space - avoid spilling it.
°Clark
detergent) or 35ml (liquid detergent) and additional tea spoon of
detergent being used.
If this happens, clean the spill immediately with a dry cloth.
Exceeding the stated amount does not result in a more effective
1. Open the dispenser B by pressing and pulling up the tab on
English
detergent directly inside the tub. If tablets are used, one tablet
Exceeding the stated amount does not result in a more effective
3. Press the lid down until you hear a click to close it.
wash and increases environmental pollution.
the lid.
0 - 10
will be enough.
degrees
wash and increases environmental pollution.
NEVER pour the rinse aid directly into the tub.
2. Carefully introduce the rinse aid as far as the maximum
If the crockery is only lightly soiled or if it has been rinsed with
The amount can be adjusted to the soil level. In the case of
The amount can be adjusted to the soil level. In the case of
11 - 20
(110 ml) reference notch of the filling space - avoid spilling it.
0 - 7
water before being placed in the dishwasher, reduce the amount
normally soiled items, use approximately either 35g (powder
normally soiled items, use approximately either 35g (powder
If this happens, clean the spill immediately with a dry cloth.
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
21 - 30
detergent) or 35ml (liquid detergent) and additional tea spoon of
detergent) or 35ml (liquid detergent) and additional tea spoon of
D
B
8 - 14
3. Press the lid down until you hear a click to close it.
powder/gel putted inside the tub.
detergent directly inside the tub. If tablets are used, one tablet
detergent directly inside the tub. If tablets are used, one tablet
31 - 60
NEVER pour the rinse aid directly into the tub.
A
will be enough.
C
15 - 20
will be enough.
61 - 90
If the crockery is only lightly soiled or if it has been rinsed with
If the crockery is only lightly soiled or if it has been rinsed with
water before being placed in the dishwasher, reduce the amount
21 - 42
water before being placed in the dishwasher, reduce the amount
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
powder/gel putted inside the tub.
43 - 62
B
powder/gel putted inside the tub.
A
1. When measuring out the detergent refer to the mentioned
1.
When measuring out the detergent refer to the mentioned ear-
A
earlier information to add the proper quantity. Inside the
lier information to add the proper quantity. Inside the dispenser
dispenser
h
B there are indications to help the detergent dosing.
in
B
dosing.
2.
Remove detergent residues from the edges of the dispenser
A
2. Remove detergent residues from the edges of the dispenser
1.
When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
B
and close the cover until it clicks.
lier information to add the proper quantity. Inside the dispenser
3. Close the lid of the detergent dispenser by pulling it up until
3. Close the lid of the detergent dispenser by pulling it up until
B there are indications to help the detergent dosing.
2
3 4
5
6 7 8
A
the closing device is secured in place.
the closing device is secured in place.
2.
Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
The detergent dispenser automatically opens up at the right
The detergent dispenser automatically opens up at the right time
3. Close the lid of the detergent dispenser by pulling it up until
1.
When measuring out the detergent refer to the mentioned ear-
time according to the program. If all-in-one detergents are used,
according to the program. If all-in-one detergents are used, we
the closing device is secured in place.
lier information to add the proper quantity. Inside the dispenser
we recommend using the TABLET button, because it adjusts the
recommend using the TABLET button, because it adjusts the
B there are indications to help the detergent dosing.
The detergent dispenser automatically opens up at the right time
program so that the best washing and drying results are always
program so that the best washing and drying results are always
2.
Remove detergent residues from the edges of the dispenser
according to the program. If all-in-one detergents are used, we
achieved.
1.
When measuring out the detergent refer to the mentioned ear-
achieved.
and close the cover until it clicks.
recommend using the TABLET button, because it adjusts the
lier information to add the proper quantity. Inside the dispenser
3. Close the lid of the detergent dispenser by pulling it up until
program so that the best washing and drying results are always
B there are indications to help the detergent dosing.
the closing device is secured in place.
achieved.
2.
Remove detergent residues from the edges of the dispenser
The detergent dispenser automatically opens up at the right time
and close the cover until it clicks.
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
the closing device is secured in place.
achieved.
The detergent dispenser automatically opens up at the right time
according to the program. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
achieved.
three times - a beep will be heard.
to select the level of rinse aid quantity to be
three times - a beep will be heard.
for 5 seconds, until you hear a beep.
to select the desired hardness level (see
to select the level of rinse aid quantity to be
for 5 seconds, until you hear a beep.
Water Hardness Table
three times - a beep will be heard.
three times - a beep will be heard.
°dH
to select the desired hardness level (see
German degrees
to select the level of rinse aid quantity to be
Soft
to select the level of rinse aid quantity to be
0 - 6
Water Hardness Table
7 - 11
°dH
12 - 17
German degrees
Hard
18 - 34
Soft
0 - 6
35 - 50
7 - 11
12 - 17
Hard
18 - 34
1
35 - 50
2
3
4
5
B
6
B
10
To open the detergent
To open the detergent dispenser
press button A.
Introduce the detergent into
the dry dispenser B only.
Place the amount of detergent
To open the detergent dispenser
for pre-washing directly inside
press button A.
the tub.
To open the detergent dispenser
Introduce the detergent into
press button A.
there are indications to help the detergent
D
the dry dispenser B only.
Introduce the detergent into
Place the amount of detergent
3sec
the dry dispenser B only.
for pre-washing directly inside
the tub.
Place the amount of detergent
11
9
10
for pre-washing directly inside
the tub.
7.
Display
8.
Half Load indicator light
9.
Half Load button
10. Delay button
11. START/Pause button with indicator light / Tab
• Switch the dishwash
• Press button
• Switch it off using th
supplied.
s.
• Press button
• Switch it off using th
• Switch it on using th
Setting is complete!
•
The current selection
23
If the rinse aid level is
•
Press button
supplied. The LOW RIN
s.
supplied.
run out of rinse aid. A m
• Switch it off using th
the dishwasher model.
Setting is complete!
please follow instruction
If the rinse aid level is
• If you see bluish stre
supplied. The LOW RIN
8
• If there are drops of
run out of rinse aid. A m
set a high number (3
the dishwasher model.
8
please follow instruction
• If you see bluish stre
FILLING THE DETE
• If there are drops of
� � � � � � � � � �
set a high number (3
dishwashers.
To achieve the best wa
8
FILLING THE DETE
useof detergent, rinse
We recommend using
� � � � � � � � � �
or chlorine, as these pr
dishwashers.
Good washing results
To achieve the best wa
detergent being used.
°fH
useof detergent, rinse
French degrees
Exceeding the stated a
We recommend using
wash and increases en
0 - 10
or chlorine, as these pr
The amount can be ad
Good washing results
11 - 20
normally soiled items,
detergent being used.
°fH
21 - 30
detergent) or 35ml (liqu
French degrees
Exceeding the stated a
detergent directly insid
31 - 60
wash and increases en
0 - 10
will be enough.
The amount can be ad
61 - 90
11 - 20
If the crockery is only l
normally soiled items,
water before being pla
21 - 30
detergent) or 35ml (liqu
of detergent used acco
detergent directly insid
31 - 60
powder/gel putted insid
will be enough.
61 - 90
If the crockery is only l
1.
Upper rack
water before being pla
2.
� � � � � � �
of detergent used acco
powder/gel putted insid
3.
Upper rack height adjuster
B
4.
Upper sprayer arm
5.
Lower rack
A
6.
Cutlery basket
7.
Lower sprayer arm
B
8.
Filter Assembly
A
9.
Salt reservoir
1.
When measuring ou
A
10. Detergent and Rinse Aid dispensers
lier information to a
11. Rating plate
B there are indicatio
12. Control panel
2.
Remove detergent
and close the cover
1.
When measuring ou
A
3. Close the lid of the
lier information to a
the closing device i
B there are indicatio
To open the detergent dispenser
2.
Remove detergent
The detergent dispens
dispenser press button C.
press button A.
and close the cover
according to the progr
Introduce the detergent
3. Close the lid of the
recommend using the
Introduce the detergent into
into the dry dispenser D
the closing device i
program so that the be
the dry dispenser B only.
only.
achieved.
The detergent dispens
Place the amount of
Place the amount of detergent
according to the progr
detergent for
for pre-washing directly inside
recommend using the
pre-washing directly
the tub.
program so that the be
inside the tub.
achieved.
1. Remove the lower rack and
unscrew the reservoir cap
(anticlockwise).
2. Only the first time you do this: fill
the salt reservoir with water.
3. Position the funnel (see figure)
and fill the salt reservoir right up
to s
thre
to s
7