HIKVISION DS-2CD754F-EI Kurulum Kılavuzu - Sayfa 4

DVR HIKVISION DS-2CD754F-EI için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKVISION DS-2CD754F-EI 13 sayfaları. Indoor ip dome camera
Ayrıca HIKVISION DS-2CD754F-EI için: Hızlı Kılavuz (18 sayfalar)

Sayfayı Yazdır

HIKVISION DS-2CD754F-EI Kurulum Kılavuzu

Installation Guide of Indoor IP Dome Camera

Notice:

1. Make sure the power supply voltage is correct before using the camera.

2. Do not drop the camera or subject it to physical shock.

3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit

of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put

on the lens cap to protect the sensor from dirt.

4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at the

same time.

5. The sensor may be burned out by a laser beam, so when any laser equipment is being used,

make sure that the surface of the sensor will not be exposed to the laser beam.

6. Do not place the camera in extremely hot or cold temperatures (the operating temperature

should be between -10°C ~ +60°C, dusty or damp locations, and do not expose it to high

electromagnetic radiation.

7. To avoid heat accumulation, good ventilation is required for a proper operating environment.

8. While shipping, the camera should be packed in its original packing, or packing of the same

texture.

9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be

replaced regularly according to their average life time. The average time varies because of

differences between operating environment and usage history, so regular checking is

recommended for all users. Please contact with your dealer for more details.