Avantco 178Z2R4P Kullanıcı Kılavuzu - Sayfa 6
Ticari Gıda Ekipmanları Avantco 178Z2R4P için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 178Z2R4P 9 sayfaları. Top mount reach-in refrigerator and freezer
Sayfayı Yazdır
User Manual
Adjusting the Temperature
Your new freezer is already factory-set to run at optimum temperatures for food safety and
should require no adjustments.
Refrigerators are set to cycle between a minimum temperature of 33 degrees Fahrenheit and a
maximum temperature of 40 degrees Fahrenheit
Freezers are set to cycle between a minimum temperature of -5 degrees Fahrenheit and a maximum
temperature of 2 degrees Fahrenheit.
Adjusting the temperature changes the minimum temperature at which your unit will run. Your unit
will not run constantly at this setting. To change it, follow these instructions:
Digital Control Units
Always remember to calculate the differential if you change the minimum temperature setting. The
cabinet temperature will fluctuate up to +7 degrees over your set minimum temperature as the
compressor runs and shuts off. Setting the temperature too high will result in unsafe maximum
temperatures and possible health code violations.
Your Z Series unit compressor will continue to run when the door is left ajar. After 15 minutes of
being left ajar, an audible alarm will sound. At the same time, the display board will display "dor".
1. Hold down the menu button
displays "--", then background button lights up)
2. Select
button and click; At this time, enter temperature setting
interface, the display screen displays the current set value
3. Adjust the downtime temperature value used by the user pressing
4. After the adjustment, click the menu button
selection interface;
5. Wait for about 7s, the digital display will automatically save and exit, and
return to the normal display interface.
- 6 -
for 3s, (At this time, the display screen
to return the menu