IKEA HYGIENISK Manuel - Sayfa 16

Bulaşık Makinesi IKEA HYGIENISK için çevrimiçi göz atın veya pdf Manuel indirin. IKEA HYGIENISK 28 sayfaları.
Ayrıca IKEA HYGIENISK için: Manuel (32 sayfalar), Manuel (32 sayfalar), Manuel (28 sayfalar), Manuel (29 sayfalar)

Sayfayı Yazdır

ENGLISH

Setting and starting a programme

The Auto Off function

This function decreases energy consumption

by automatically deactivating the

appliance when it is not operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has not

started.

Starting a programme

Caution! Do not remove the

baskets from the dishwasher

before a wash cycle.

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press

the display shows the number of the

programme you want to start. The

display will show the programme

number for approximately 3 seconds

and next the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with delay start

1. Set a programme.

2. Press

repeatedly until the display

shows the delay time you want to set

(from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is possible

to increase the delay time but not to change

the selection of the programme and

options.

repeatedly until

When the countdown is completed, the

programme starts.

Opening the door while the appliance

operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the door,

the appliance continues from the point of

interruption.

If the door is opened for more

than 30 seconds during the

drying phase, the running

programme ends. It does not

happen if the door is opened by

AutoOpen function.

Cancelling the delay start while the

countdown operates

When you cancel the delay start you have

to set the programme and options again.

Press and hold RESET until the appliance is

in programme selection mode.

Cancelling the programme

Press and hold RESET until the appliance is

in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a new

programme.

End of the programme

When the programme is complete, the

display shows 0:00. The indicator

All buttons are inactive except for the

on/off button.

1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

is on.