HIKVISION DS-2CE79U8T-IT3Z Kullanıcı Kılavuzu - Sayfa 9
DVR HIKVISION DS-2CE79U8T-IT3Z için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION DS-2CE79U8T-IT3Z 16 sayfaları. Turbo hd 4k series vf bullet & turret & dome camera
Ayrıca HIKVISION DS-2CE79U8T-IT3Z için: Hızlı Başlangıç Kılavuzu (17 sayfalar)
Sayfayı Yazdır
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box first.
Steps:
1. Paste the junction box's drill template on the
ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Figure 2-12 Drill Template of the Junction Box
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Refer to step 3 of 2.2.1 Ceiling/Wall Mounting
without Junction Box to take out the camera's main
body.
4. Take apart the junction box, and align the screw
holes of the camera with those on the junction
box's cover.
5. Fix the camera's mounting base on the junction
box's cover with three PM4 × 10 screws.
Figure 2-13 Secure Screws on Junction Box's Cover
6. Secure the junction box's body on the ceiling/wall
with four PA4 × 25 screws.
Figure 2-14 Secure the Junction Box's Body on Wall
7. Combine the junction box cover with its body by
tightening four screws on junction box's cover.
Junction
Box Body
/Ceiling