Avantco F200 Kullanıcı Kılavuzu - Sayfa 5

Ticari Gıda Ekipmanları Avantco F200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco F200 12 sayfaları. Electric countertop fryers

Sayfayı Yazdır

Circuit Diagram

S1 -Micro-switch

SA-Overheat switch

EH-Heater element

HL 1-Power-on indicator

HL 2-Heater-on cycling indicator

SB- Temperature regulator

E: Ground connection

Note: The circuits of the two fryers are identical. The difference is that the two tank fryer has two

separate electrical unit boxes and receptacles.

Instructions for Fryer Usage

1. Please make sure the power supply you are using is adequate for continual fryer use and voltage is adequate. The

use of a surge protector or circuit breaker is advisable.

2. Fill oil receptacle with vegetable oil to between the minimum and maximum levels, allowing for food volume.

3. Make sure the temperature regulator knob is in the "OFF" position before you plug the machine into an outlet. Once

you plug the machine in, a green "Power Light" will come on. Then, rotate the temperature regulator knob clockwise

to the desired temperature indicated by the pointer. When the desired temperature has been reached, the yellow "Hot

Light" will turn off and cycle, and the temperature controller will maintain the temperature automatically.

4. Lift food basket up and away from machine to load food, and carefully place loaded basket into machine to avoid

splash. Gently shake off excess oil from food when removing from tank after frying.

5. The enclosed frying basket is intended to hold small foods such as French fries and onion rings. Large food can be

placed directly into the basket or oil tank.

www.AvantcoEquipment.com

NOTES ABOUT FOOD:

VOLUME OF FOOD SHOULD BE LIMITED TO AVOID OIL OVERFLOWING

User Manual

FOODS THAT DO NOT ABSORB OIL EASILY SHOULD BE LIMITED TO AV

OVERFLOWING

PLACE LARGE FOODS INTO THE FRYER CAREFULLY TO PREVENT OIL

OVERFLOW AND SPATTER

D. Circuit Diagram

S1 -Micro-switch

SA-Overheat switch

EH-Heater element

HL 1-Power-on indicator

HL 2-Heater-on cycling indicator

SB- Temperature regulator

E Ground connection

NOTE:

THE CIRCUITS OF THE TWO FRYERS ARE IDENTICA

DIFFERENCE IS THAT THE TWO TANK FRYER HAS TWO SE

ELECTRICAL UNIT BOXES AND RECEPTICLES.