Green Tools GT-CDL20 Kullanıcı Kılavuzu - Sayfa 10

Elektrikli Tornavida Green Tools GT-CDL20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Green Tools GT-CDL20 20 sayfaları.

Sayfayı Yazdır
10
www.euromasterbg.com
EN
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic
tools - GREEN TOOLS. When properly installed and operating, GREEN TOOLS are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and
excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important
that these instructions will remain available for future reference to all who will use the machine. If you sell
it to a new owner "Instructions for Use" must be submitted along with it to enable new users to become
familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark GREEN TOOLS.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, ; www.
euromasterbg.com; e-mail: [email protected].
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd,
England.
Parameter
Type of model
Input voltage
Frequency
Output voltage
Charging current
Battery charging time
Protection class
Rated voltage
No-load speed
Chuck size
Torque control range
Мanual gearbox
Max. Toruqe force
Type of battery cells
Electric charge of the battery
Original instructions' manual
Dear Customer,

TECHNICAL DATA

Charger
Cordless drill
Units of
measurement
-
GT-CDL 20
V AC
Hz
V DC
mA
h
-
V DC
min
-1
0-350 / 0-1150
mm
-
-
Nm
-
mAh
Value
230
50
16.9
450
3-5
II
14.4
10
18+1
2
26
Li-ion
1500