IKEA W11212416C Kullanıcı Talimatları - Sayfa 11
Bulaşık Makinesi IKEA W11212416C için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. IKEA W11212416C 48 sayfaları.
Sayfayı Yazdır
CONTROLS AND CYCLE STATUS
CONTROL
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock
indicator is lit, all buttons are disabled. The dishwasher door can still be opened/closed while the controls are
locked.
Press to start or resume a
wash cycle.
To cancel a wash cycle after it
has been started.
To follow progress of
your dishwasher cycle.
Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water
and energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require
maintenance to sustain peak cleaning performance.
The triple filter system consists of 2 parts, an upper filter
assembly and a lower filter.
The upper filter assembly keeps oversized items and foreign
■
objects, along with very fine food particles, out of the pump.
The lower filter keeps food from being recirculated onto your
■
dishwasher.
The filters may need to be cleaned when:
Visible objects or soils are on the upper filter assembly.
■
There is degradation in cleaning performance (that is, soils
■
still present on dishes).
Dishes feel gritty to the touch.
■
It is very easy to remove and maintain the filters. The chart below
shows the recommended cleaning frequency.
Number of Loads
If you only scrape before loading* If you scrape and rinse before loading
Per Week
8-12
Every two months
4-7
Every four months
1-3
Twice per year
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes.
This will also save you time and effort.
Very Hard Water
If you have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
the "Troubleshooting" section.
PURPOSE
If the door is opened during a cycle or the power is interrupted, the
START/RESUME LED flashes. The cycle will not resume until the
START/RESUME keypad is pressed and the door is closed.
NOTE: Push door firmly closed within 4 seconds of pressing
START/RESUME or the dishwasher will not start. If door is not closed within
4 seconds the START/RESUME LED will flash and an audible tone will sound
when the door is closed.
Press to cancel a wash cycle. then, close the door firmly. The dishwasher
starts a 2-minute drain (if needed). Let the dishwasher drain completely.
If you select the Sani Rinse option, when the cycle is finished, the
"Sanitized" indicator glows.
If your dishwasher did not properly sanitize your dishes, the light flashes
at the end of the cycle. This can happen if the cycle is interrupted or water
could not be heated to required temperature.
The light goes off when you open and close door or press CANCEL.
Filtration System
RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER
Every four months
Once per year
Once per year
COMMENTS
Upper filter
assembly
Lower filter
If you wash before loading
Once per year
Once per year
Once per year
11