HIKVISION DS-7108HGHI-F1 Hızlı Başlangıç Kılavuzu - Sayfa 6
DVR HIKVISION DS-7108HGHI-F1 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-7108HGHI-F1 17 sayfaları. Network/digital video recorder
Ayrıca HIKVISION DS-7108HGHI-F1 için: Hızlı Başlangıç Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Chapter 1 Rear Panel Interfaces Description
The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description
of rear panels.
Item
Description
BNC interface for Turbo HD and
VIDEO IN
analog video input
AUDIO IN
RCA connector
LINE IN
Connector for two-way audio input
DB15 connector for VGA output.
VGA
Displays local video output and menu.
RS-485
Connector for RS-485 devices
Interface
LAN
Connector for network
ALARM
Connector for alarm input/output
IN/OUT
Power
Switch for turning on/off the device
Switch
DVR Installation
During installation of the DVR:
Use brackets for rack mounting.
Ensure ample room for audio and video cables.
When routing cables, ensure that the bend radius of the cables are no less than five times than its
diameter.
Connect the alarm cable.
Allow at least 2 cm (≈0.75-inch) of space between racks mounted devices.
Ensure the DVR is grounded.
Environmental temperature should be within the range of -10 to +55º C, +14 to +131º F.
Environmental humidity should be within the range of 10% to 90%.
Digital Video Recorder Quick Start Guide
Common Interfaces Description of Rear Panels
Chapter 2 Installation and Connections
Item
VIDEO OUT
AUDIO OUT
USB
Interface
HDMI
RS-232
Interface
eSATA
GND
Power
Supply
5
Description
BNC connector for video
output
RCA connector
Universal Serial Bus (USB) port
for additional devices
HDMI video output connector
Connector for RS-232 devices
Storage and expansion
interface for record or backup
Ground
100 to 240 VAC, 48 VDC, or 12
VDC for different models