ALIBI ali-bc1080e Hızlı Kurulum Kılavuzu - Sayfa 2
Güvenlik Kamerası ALIBI ali-bc1080e için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. ALIBI ali-bc1080e 4 sayfaları. Hd-tvi outdoor infrared bullet camera
Sayfayı Yazdır
2.
Verify that video from the camera can be seen on the HD-TVI DVR (HVR) monitor.
3.
While observing video from the camera, loosen the mounting bracket pan, elevation and horizontal
line adjustment lock screws, point the camera at your surveillance target, and then tighten
adjustment lock screws and lock nut to hold the camera in position.
The mounting bracket pan adjustment can be made after loosening the lock nut (see the photo
below). Use a Phillips #1 screwdriver for the elevation and horizontal line adjustment lock screws.
Loosen for horizon
line adjustment
0° ~ 360°
Camera mounting bracket adjustment
Step 3.
Open the OSD menu
The On Screen Display (OSD) provides configuration options for refining the performance of the camera.
It also can be used to block sensitive portions in the field of view (Privacy). You can open the OSD menu
system from either the HVR Live View display or through remote login to the HVR.
Opening the OSD Menu through the HVR
To open the OSD menu on the HVR monitor:
1.
Open the HVR Live View screen, and then click inside the screen where the PTZ camera video image
is displayed. See below.
Click the PTZ Control icon in the Quick Setting Toolbar. The PTZ camera Live View window will
2.
expand to full screen and the pop-up window shown below will open.
Menu icon
In the PTZ Control panel pop-up window, click the Menu icon on the Configuration line.
3.
www.observint.com
2
Loosen for pan
adjustment
(lock nut)
Loosen for
elevation
adjustment
0° ~ 90°
0° ~ 360°
4.
Drag the PTZ Control window to a position where it doesn't cover the OSD menu (such as the lower-
right corner.
The PTZ Control window direction buttons and the Iris + and Iris - keys are used to navigate the
NOTE
OSD menu and set configuration options in the camera. See "OSD menu navigation" on page 3.
Opening the OSD Menu through remote login to the HVR
To open the OSD menu during a remote login to the HVR:
1.
After logging into the HVR, open the PTZ camera in a single Live View window.
In the PTZ control panel, scroll down the Preset list to Preset95, click the entry to highlight it, and
2.
then click the Call icon. See below. The OSD MAIN MENUS screen will open.
The PTZ control panel direction buttons and the Iris + and Iris - keys are used to navigate the
NOTE
OSD menu and set configuration options in the camera.
Preset95 Call icon
PTZ control panel
© 2015 Observint Technologies. All rights reserved.