GAPOSA QCTX16Y Manuel - Sayfa 9

Verici GAPOSA QCTX16Y için çevrimiçi göz atın veya pdf Manuel indirin. GAPOSA QCTX16Y 20 sayfaları. Channels handheld display remote, 16 channels handheld display remote with timer 868 mhz range
Ayrıca GAPOSA QCTX16Y için: Hızlı Başlangıç Kılavuzu (12 sayfalar)

Sayfayı Yazdır
PROGRAMMING

PROGRAMMING TRANSMITTER

CAUTION: If more motors with receiver have to be installed, it is important to power up only one
motor at time during the first programming session, in order to avoid any interferences with
others.
1
Power up the motor to be programmed.
Press and hold the PROG-TX button
2
until the motor starts moving.
Check the rotation of the motor, then
3
release PROG-TX (the motor stops).
Within 5 seconds press the
corresponding button (i.e. UP if the
motor rotates upwards or DOWN if
4
vice versa). The transmitter has been
programmed and the rotation of the
motor has been synchronized.
OFF
ON
A