GAPOSA SileoXS XSDC3DX128 Hızlı Başlangıç Kılavuzu - Sayfa 5

Pencere Panjurları GAPOSA SileoXS XSDC3DX128 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. GAPOSA SileoXS XSDC3DX128 8 sayfaları. Ultra quiet motorization

Sayfayı Yazdır

4 XSDC3EX030W

WARNING: The internal regulator

works up to 15VCC

3. SLEEP MODE

Sleep mode is a status which prevents a motor from moving during shipping or assembling:

Wake up the motor: click the push button on the head of the motor

the motor makes 1 jog

Activate sleeping mode: click the push button on the head of the motor

Note: any short press of the button on the head of the motor will either wake up the

motor or activate sleeping mode sequentially.

ATTENTION: In an installation of more than one XSDC battery motors wake up one

motor at a time in order to pair it to its own transmitter.

4. TRANSMITTERS

STOP

DOWN

PROG-TX

Program the transmitter

PROG-FC

Set the limit switch

5. PROGRAMMING TRANSMITTERS

Press and hold the PROG-TX button

(on the back of transmitter or on the

head of the motor)until the motor

starts moving

Power operated motor 12VCC

(only for Li-Ion integrated battery motor)

the motor makes 2 jogs

QCT..01

Check the motor rotation then

release the PROG-TX button (the

motor stops)

Antenna

Black wire

QCT..02

QCT..03

Power cable

right wire

Positive +

Push- button

QCT..04

Within 5 seconds, press the

corresponding button (UP if the

motor turns upwards or DOWN if

the motor turns downwards).

Transmitter is now programmed.