KitchenAid KUDI01FL Kullanım ve Bakım Kılavuzu - Sayfa 11
Bulaşık Makinesi KitchenAid KUDI01FL için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. KitchenAid KUDI01FL 19 sayfaları. Undercounter dishwasher
Ayrıca KitchenAid KUDI01FL için: Kurulum Talimatları (1 sayfalar), Tüketici Referans Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Cycle Selection Charts
Select the wash cycle and options desired. Or press START to
repeat the same cycle and options as the previous cycle.
NOTE: If the last cycle you completed was a rinse cycle, the
dishwasher will run the last full wash cycle and options that you
selected when you press Start.
If the power is off or the door is open for an extended period
of time, the Start button memory will default to the Normal
cycle with heated drying.
If you do not run the dishwasher daily, close the door to
maintain memory.
A " " shows what steps are in each cycle.
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
This model meets the E
NERGY
efficiency.
Cycle time includes dry time. An asterisk ( * ) by the cycle time
indicates the cycle time might be longer depending on the
temperature of the water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot
enough, the cycle time will be as shown.
Use this cycle for
heavily-soiled pots,
pans, casseroles,
regular tableware and
harder than normal
water conditions.
Pre-
Main
Rinse
Rinse
Wash
Wash
130°F
140°F
(54°C)
(60°C)
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.)
Pre-
Main
Purge†
Rinse
Wash
Wash
120°F
(49°C)
S
®
guidelines for energy
TAR
Use both detergent
dispenser sections.
Final
Dry
Time
Heated
(min)
Rinse
89*
140°F
(60°C)
Use both detergent
dispenser sections.
Final
Dry
Time
Heated
(min)
Rinse
79*
140°F
(60°C)
Pre-
Rinse
Wash
A small amount of water is run through the pump to remove
†
soil particles between the main wash and final rinse.
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door to access the
control panel.
2. Press
Cancel glows.
3. Close the door. The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely.
To stop the drain
You can press CANCEL again to stop the drain. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL before starting the dishwasher to clear all options
and cycles.
Water
Usage
(gal/L)
Changing a Cycle or Setting
6.9/26
During the first minute of a cycle
1. Open the door.
2. Press a new cycle and/or options.
3. Check the detergent dispensers. They must be filled properly
for the new cycle.
4. Close the door. The dishwasher resumes the new cycle
and/or option after a 5-second pause.
After the first minute of a cycle
Water
1. Carefully open the door slightly to stop the cycle. Wait for the
Usage
(gal/L)
spraying action to stop before opening the door to access the
control panel.
5.9/22.3
2. Press
Cancel glows.
3. Close the door. Your dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely.
4. Select a new cycle and/or options.
5. Press START.
6. Check the detergent dispensers. They must be filled properly
for the new cycle.
7. Close the door.
Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
Do not use detergent
away.
with this cycle.
Main
Rinse
Final
Dry
Wash
Heated
Rinse
Canceling a Cycle
Time
Water
(min)
Usage
(gal/L)
10
1.8/7
11