GAPOSA XQ50 Manuel - Sayfa 7

Pencere Panjurları GAPOSA XQ50 için çevrimiçi göz atın veya pdf Manuel indirin. GAPOSA XQ50 13 sayfaları. Tubular motors with mechanical limit switch and integrated receiver.
Ayrıca GAPOSA XQ50 için: Talimatlar Kılavuzu (8 sayfalar), Talimatlar (4 sayfalar), Programlama Hızlı Kılavuzu (7 sayfalar), Manuel (15 sayfalar), Talimatlar Kılavuzu (13 sayfalar), Manuel (16 sayfalar), Talimatlar Kılavuzu (8 sayfalar)

PROGRAMMING

PROGRAMMING TRANSMITTER

CAUTION: If more motors with receiver have to be installed, it is important to

power up only one motor at time during the first programming session,

in order to avoid any interferences with others.

Power up the motor to be

programmed.

Press and hold the PROG-TX

button until the motor starts

moving.

Check the rotation of the motor,

then release PROG-TX (the motor

stops).

Within 5 seconds press the

corresponding button (i.e. UP

if the motor rotates upwards

or DOWN if vice versa).

The transmitter has been

programmed and the rotation of

the motor has been synchronized.

1/4

OFF